Product Description:

The AM3031-0C41-0000 is a synchronous servo motor manufactured by Beckhoff within the AM Synchronous Servo Motors series. Classified as a Standard version, it supplies rotational drive power for positioning and velocity control tasks in automated machinery. The motor integrates with Beckhoff drive controllers to support low-inertia motion in pick-and-place units, woodworking spindles, and packaging axes, where accurate torque production and repeatable feedback are required for coordinated multi-axis operation.

Mechanical interface details begin with a flange that measures 72 mm across, allowing the unit to bolt directly onto compact gearheads or mounting frames. Power and signal conductors exit through a rotatable angular connector or terminal box, so the installer can orient the cabling to avoid tight bends inside crowded enclosures. Rotor position is reported by a Hiperface multi-turn 128 SinCos from F6 encoder, giving the controller absolute position data across multiple turns for homing-free starts. The electromagnetic parking device is a 24 V holding brake; its coil is energized by a dedicated control line at the same bus level that supplies the brake release voltage of 24 VDC. These features support safe load retention during power-off while still enabling quick release when motion resumes.

Torque capacity varies with stack length; in this configuration it produces between 2 Nm to 3.5 Nm of holding torque when the brake is engaged. A smooth shaft finish simplifies coupling to clamping hubs or backlash-free bellows couplers without keyways. Electrically, Winding Code C describes the coil design matched to mid-range current in Beckhoff’s AX drive family, while Overall Length Code 1 denotes the shortest housing in the AM3031 group, reducing cabinet depth. Combined, these parameters help engineers size a motor that satisfies space limits while still meeting dynamic response targets.