AM3031-0C30-0000
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The AM3031-0C30-0000, from Beckhoff's AM Synchronous Servo Motors series, features an incremental encoder with a resolution of 1024 pulses per revolution. It operates at a maximum rotational speed of 6000 rpm and has an HTL output signal. With an IP65 protection class, it ensures durability and reliability.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM3031-0C30-0000 synchronous servomotor provided by Beckhoff depicts low inertia. This motor operates in the 230 VAC to 400 VAC range. The product meets the requirements for high performance plus high dynamics. This device’s design portrays a 72 mm flange. The unit houses no holding brake. Its standstill torque depends on its windings. This motor’s rated speed depends on the rated supply voltage.
The product is lightweight with a mass of only 1.5 kg. This device is used for torque and/or speed controlled operation along with the supporting digital servo drive. The unit can never be operated on its own. It must be disconnected from its servo drive before any work is carried out on its electrical parts that have a voltage rating of more than 50 V. This motor requires adequate ventilation at the installation site. The product’s shaft should have no hard impact when its transportation takes place. This device supports only exterior cleaning with an agent such as isopropanol. The unit storage is allowed for any duration without limitation. Its rotor has a single stack and permanent magnets.
This motor uses a C-type winding. The product utilizes a BISS encoder with only one turn for its feedback. The product’s PTC has a 155 °C rated temperature with +/-5% tolerance. This device’s gear wheels or couplings are tightened using a locking thread. The unit’s housing should have a proper earth connection. Its assembly and orientation must be checked before commencing its commissioning. This synchronous servomotor’s housing must be earthed properly before its operation.
Frequently Asked Questions about AM3031-0C30-0000:
Q: How often should the AM3031-0C30-0000 motor be checked for bearing noise?
A: The AM3031-0C30-0000 motor should be checked for bearing noise after every 2,500 hours of operation.
Q: What kind of bearings does the AM3031-0C30-0000 motor have?
A: The AM3031-0C30-0000 motor has ball bearings.
Q: What is the function of the PTC of the AM3031-0C30-0000 motor?
A: The function of the PTC of the AM3031-0C30-0000 motor is to provide protection against overtemperature.
Q: What kind of cables are used with the AM3031-0C30-0000 motor?
A: The manufacturer's preassembled cables are used with the AM3031-0C30-0000 motor.
Q: How many poles does the AM3031-0C30-0000 motor have?
A: The AM3031-0C30-0000 motor has eight poles.
