Product Description:

The AM3023-1C30-0000 is a synchronous servo motor produced by Beckhoff and supplied as part of the AM Synchronous Servo Motors series. This standard unit is intended for rotary positioning tasks in industrial automation, providing controlled torque and speed for pick-and-place stations, packaging lines, and compact machine tools. Integrated with Beckhoff drive controllers, it converts electrical energy into rapid, precise motion so equipment can meet demanding cycle-time requirements without exceeding cabinet space. Its compact format also suits axes where short travel times and repeatable positioning are required in a limited installation area.

The motor attaches to machinery through a 58 mm square flange that aligns the stator housing with gearboxes or machine frames. Electrical power and signal conductors enter through a rotatable angular connector or terminal box, allowing cable routing to be adjusted for tighter enclosure layouts. Rotor position is measured by a Hiperface single-turn 128 SinCos from F6 encoder, giving the drive high-resolution sine and cosine signals for smooth velocity regulation and accurate commutation. The motor uses winding code C, and its resistance and inductance match the ratings of the paired inverter. Overall length code 3 identifies the stack length used in the AM3023 frame and supports the motor's continuous torque capacity.

The unit is supplied without a holding brake, so static loads must be secured by the drive or by an external locking element when mains power is removed. Output torque is transmitted through a shaft with groove and feather key, and the keyway follows DIN 6885 so standard couplings and pulleys can be fitted without special machining. This configuration represents the standard version and uses conventional bearings and housing materials. It is well suited to indexing, transfer, and servo-fed mechanisms that rely on stable response during repeated starts and stops.