Product Description:

The AM3023-0C20-0000 is a synchronous servo motor built by Beckhoff for compact closed-loop automation axes. As a rotary actuator, it converts drive current from a matching amplifier into precise torque and speed for pick-and-place gantries, packaging axes, and other positioning systems. The motor is suited to applications that need accurate motion with multi-turn feedback in a small installation space. That arrangement supports repeatable motion on indexing tasks, short transfer moves, and similar duty cycles where consistent response is important.

Mechanical interfacing starts with a 58 mm flange that aligns the housing to standard mounting patterns. Power and signal lines are routed through a rotatable angular connector or an optional terminal box, allowing the cable exit direction to be adjusted after mounting. Rotor position is delivered by an OCT multi-turn feedback system that returns absolute values across several revolutions, so the axis can report position immediately after power-up. The motor features a smooth shaft for use with backlash-free clamping hubs. It is supplied without a holding brake, so vertical or suspended loads need a separate holding method when power is removed. Its overall length follows internal code 3, which corresponds to the stator stack length used for this torque range.

Electrical behavior follows winding code C, which pairs with compatible Beckhoff drive controllers for the nominal current and voltage range used on mid-range machine axes. The motor belongs to the standard motor series, so its dimensional tolerances and thermal class follow the normal production version for this frame. It carries the standard version designation, which means no special coatings, cooling jackets, or reinforced bearings are included. In the Synchronous Servomotors product series, this combination matches models that use the same feedback protocol and connector geometry.