AM3022-0C01-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff AM3022-0C01-0000 is part of the AM Synchronous Servo Motors series. It features a 58 mm flange size, a smooth shaft design, and a two-pole resolver feedback type. This standard servo motor provides a holding torque of 2 Nm and includes a 24 VDC holding brake.
Internal Product Review
The AM3022-0C01-0000 is a Beckhoff synchronous servomotor with resolver, two-pole feedback and a standard motor configuration. A 24 VDC holding brake rated for 2 Nm adds dependable load retention during stop and positioning conditions. A rotatable angular connector or terminal box supports clean installation, making the motor a strong choice for precise servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM3022-0C01-0000 is a synchronous servo motor produced by Beckhoff for the AM Synchronous Servo Motors series. It is intended for closed-loop position and velocity control in industrial automation where compact rotary axes are required. By supplying continuous torque while maintaining precise electrical commutation, the motor integrates into drive systems that rely on resolver feedback and a matched holding brake to secure loads during power-off states. Its compact format is useful where closely spaced axes must deliver accurate starts, stops, and speed changes.
The mechanical interface uses a flange that measures 58 mm, allowing direct mounting to gearheads or machine frames without adapter plates. Rotor position is returned through a two-pole resolver sensor, which provides analog sine-cosine signals for drive controllers that perform high-speed interpolation. Electrical power and feedback lines exit through a rotatable angular connector or an optional terminal box, so cable routing can follow the available machine layout. The stator’s thermal profile corresponds to winding code C, which lets the drive apply the appropriate current limits. Brake release requires a supply of 24 VDC, matching typical control power and simplifying wiring inside multi-axis machines. The motor uses the standard version and standard series type, without special coatings or reinforced bearings.
The integrated brake is a 24 V holding brake that clamps the rotor whenever control voltage is removed. Its static holding capacity of 2 Nm suits light to moderate loads on horizontal or lightly inclined shafts. A smooth shaft design avoids keyways, facilitating quick coupling with clamp hubs while minimizing imbalance at higher speeds. Overall build size uses length code 2, which keeps the motor short enough for tight enclosures while still accommodating the selected winding and brake components.
