Product Description:

The AM3021-1C30-0000 synchronous servo motor is manufactured by Beckhoff and belongs to the AM Synchronous Servo Motors series. It is intended for direct installation on compact handling axes, labeling heads, and light conveyor drives where repeatable angular positioning is required. By combining permanent-magnet excitation with a low-inertia rotor, the device translates the controlled output of a Beckhoff servo inverter into accurate motion sequences. The motor occupies the lower power range of the series and supports the cycle-time demands of high-speed industrial automation cells.

The mounting interface is a 58 mm square flange that matches standard machine plates and simplifies rigid alignment to gearboxes or load shafts. Electrical termination can be completed through a rotatable angular connector or a terminal box, allowing the cable outlet to be turned toward the most convenient side of the cabinet or machine frame. Rotor position is monitored by the Hiperface single-turn 128 SinCos from F6 encoder, which allows fine interpolation inside the drive for smooth velocity loops. The motor ships without a holding brake, so static load retention must be provided by drive torque or an external mechanical lock. Keyway geometry follows DIN 6885, ensuring compatibility with standardized couplings and transmission elements.

The mechanical package is identified by overall length code 1, which corresponds to the shortest stator stack offered in this frame and keeps mass and space requirements low. Torque is transmitted through a shaft with a groove and feather key, giving positive engagement without relying on friction fits. Electrical behavior is set by the stator’s winding code C, which balances continuous current with thermal limits for general-purpose duty cycles. This motor is supplied in the standard version used in the AM line.