X20BC0063 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation X20BC0063 is part of the X20 Fieldbus Input Output Modules series and supports PROFIBUS DP with a 9-pin DSUB connector. It includes galvanic isolation, has a protection rating of IP20, and operates within a temperature range of -25°C to 60°C. The module is designed for up to 2000 meters of elevation and has push-in terminal blocks with 16 pins.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The X20BC0063 is a fieldbus interface module produced by B&R Automation for the X20 Fieldbus Input Output Modules series. In a control cabinet, it acts as the network gateway, allowing distributed I/O slices to communicate with a central controller over the PROFIBUS infrastructure. By handling protocol timing and electrical conversion internally, the unit offloads these tasks from the PLC and simplifies wiring inside automated machinery. Its compact format lets the bus coupler sit directly beside the I/O stack, which helps keep cabinet layouts orderly in space-limited assemblies.
This model supports the PROFIBUS DP protocol and provides one communication channel for connection to a single bus segment. Bus cabling attaches through a rugged 9-pin DSUB connector, and outgoing power and signal lines reach neighboring modules through a 16-pin back plane secured with push-in spring cages. The internal design includes galvanic isolation between the fieldbus and system supply, which helps prevent ground loops and limits noise propagation between the network and local electronics. The housing carries an IP20 protection rating, which is suitable for installation inside an enclosed control cabinet. The module is also assigned to Overvoltage Category II, placing it in equipment used downstream of the facility distribution transformer. This arrangement works well in standard industrial panels where the gateway and attached I/O modules are mounted in a compact row.
Horizontally mounted devices can run up to 60 °C, while low-temperature starts are permitted down to −25 °C. Continuous service is allowed up to 2000 m elevation without derating, and relative humidity may reach 95% if condensation is avoided. Resistance to vibration at 1 g and shocks up to 15 g supports use on machinery that experiences moderate dynamic loading during transport or operation. These operating limits fit typical packaging, material handling, and general automation equipment installed in protected indoor environments. Stable operation still depends on correct mounting, clean cabinet airflow, and protection from moisture buildup.
