3IF789 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
47 Seconds
The B & R Automation 3IF789 is part of the System 2005 Controllers series and has a total power consumption of 2.8 W with an IP20 protection rating. It features an X2X Link Master interface with a maximum span of 100 meters and supports up to 253 stations. The controller also offers an Ethernet POWERLINK interface with a data rate of 100 Mbit/s using a shielded RJ45 port.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 3IF789 interface card is manufactured by B & R Automation as part of the System 2005 Controllers series. Designed for modular PLC backplanes, the card provides network expansion so a controller can coordinate distributed I/O and motion nodes across a plant cell. By combining an internal X2X master channel with a separate POWERLINK port, it bridges real-time fieldbus segments and lets the CPU execute synchronized machine sequences.
The module’s power budget is split between a 3.3 V rail that draws 2.3 W and a 5 V rail that draws 0.5 W. Together, these rails remain within 2.8 W of total dissipation, allowing installation in dense racks without extra cooling. For the first network channel, an onboard 4-pin male multipoint connector carries the X2X signals. Up to 253 downstream stations can be addressed over this link, and a cable length of 100 m is permitted between the master and the most distant node. An internal terminator removes the need for external resistors, and the housing has an IP20 rating, so it must be installed inside a protected enclosure. Galvanic separation is implemented between the If1 and If2 circuits as well as between the PLC core and each interface.
The second channel employs a shielded RJ45 jack and operates at 100 Mbit/s using Ethernet POWERLINK in a full-duplex topology. A local buffer of 20 kB stores telegrams to prevent frame loss during bus arbitration, and automatic collision handling is provided by the 100BASE-T transceiver. The X2X path functions as an X2X Link Master, enabling deterministic sub-millisecond updates while POWERLINK supervises larger cells or higher-level data exchange. Electrical isolation between the two channels prevents common-mode faults from propagating, and the separate interfaces support both deterministic control and standard Ethernet networking.
Frequently Asked Questions about 3IF789:
Q: How many stations can be connected through the IF1 interface on the 3IF789 controller?
A: The 3IF789 supports up to 253 stations on its IF1 interface, making it suitable for large automation networks.
Q: What is the total power consumption of the 3IF789 controller?
A: The total power consumption of the 3IF789 controller is 2.8 W, combining its 3.3 V and 5 V supplies.
Q: What fieldbus and data rate are available on the IF2 port of the 3IF789?
A: The IF2 fieldbus on the 3IF789 uses Ethernet POWERLINK with a data rate of 100 Mbit/s.
Q: What type of connector is provided for the IF2 port on the 3IF789?
A: The 3IF789 is equipped with an IF2 connector that uses a shielded RJ45 port for data communication.
Q: What is the protection rating of the 3IF789 controller?
A: The protection rating for the 3IF789 is IP20, indicating limited protection against dust and no protection against liquids.
