3IF686.9 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
48 Seconds
The 3IF686.9 is an interface module from B & R Automation and is part of the System 2005 Controllers series. It features a shielded RJ45 port that supports 100 Base-T Ethernet Standard, with a transfer rate of 100 MBit/s and reaches segment lengths up to 100 meters. The unit is designed for ETHERNET Powerlink fieldbus use, offers IP20 protection, and provides diagnostic LEDs for station and bus monitoring.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 3IF686.9 interface module is produced by B&R Automation as part of the System 2005 Controllers series. Designed for machine-level networks, the module provides a dedicated ETHERNET Powerlink connection so a controller such as a CP260 CPU can exchange real-time data with drives, I/O slices, and supervisory PCs. By fitting into a System 2005 backplane, it extends deterministic Ethernet communication without requiring a separate fieldbus card. This arrangement supports coordinated data exchange across automated equipment where predictable timing is important for control tasks and status reporting.
The communication socket is a shielded RJ45 port that helps reduce electromagnetic interference on the cable pair. Electrical signaling follows the 100 Base-T (ANSI/IEEE 802.3) standard, which supports common twisted-pair network wiring used in industrial cabinets. Because the card offers a single network node, its interface count is 1. Data is carried at a sustained 100 MBit/s transfer rate, providing bandwidth suitable for synchronized control traffic. When unrepeated cabling is used, the maximum segment length is 100 m between nodes, which supports typical cabinet-to-machine routing without additional repeaters.
In plant operation, the module tolerates ambient temperatures from 0 °C to +60 °C, allowing installation in typical control cabinets without additional climate control. The housing carries an IP20 rating, so it is intended for installation inside an enclosure while protecting against accidental finger contact with live parts. Power drawn from the controller backplane is only 1.76 W, which helps limit heat buildup in densely populated racks. Network status can be monitored through station and bus diagnostics through LED indicators and software. The module can also be set to operate as either the managing node or a controlled node while preserving isolation between the PLC and the network interface.
Frequently Asked Questions about 3IF686.9:
Q: What type of connector does the 3IF686.9 use for network connections?
A: This module includes a shielded RJ45 port for Ethernet connection.
Q: What is the data transfer rate for the 3IF686.9 module?
A: The 3IF686.9 operates at a transfer rate of 100 MBit/s.
Q: How does the 3IF686.9 indicate its diagnostic status?
A: Diagnostics can be performed via LED indicators and software for both the station and bus.
Q: Which host controllers are supported by the 3IF686.9 module?
A: The 3IF686.9 is compatible with CP260, IF260, and IF060 host systems.
Q: What is the maximum Ethernet segment length for the 3IF686.9?
A: The 3IF686.9 supports a segment length of up to 100 meters.
