3IF060.6 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
21 Seconds
The B & R Automation 3IF060.6 is an interface module from the System 2005 Controllers series and is designed for main rack mounting only. This single-width module has an IP20 protection rating and a maximum power consumption of 1 watt. It supports one insert slot for interface module inserts and allows up to nine Sg3 slots.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 3IF060.6 is an interface module manufactured by B & R Automation for inclusion in the System 2005 Controllers series. Installed in the primary controller rack, it provides an additional communication bridge that links the CPU to specialized field or peripheral devices and therefore extends the automation cell’s overall I/O reach.
It operates from the controller’s 5 V backplane and its combined consumption, including logic and transceivers, never exceeds Max. 1 W. Classified as a Interface Module, the board uses a Single-Width carrier so it occupies only one slot and leaves neighboring positions free for other functions. The housing follows the IP20 protection type, limiting installation to clean, enclosure-protected cabinets where solid objects larger than 12 mm are excluded. The slot reference is reserved for Interface Module Inserts, meaning cables or daughter cards specific to the 2005 backplane can be added without altering the rack wiring. This unit is intended for main rack mounting; it is not designed for expansion racks, a distinction that simplifies power distribution and address assignment.
Within the chassis the controller assigns a dedicated insertion point, and the insert slot count is limited to 1, preventing parallel stacking of identical boards in the same position. System segment three (Sg3) permits up to 9 interface positions overall, so multiple racks can still house additional communication channels when required. The module includes no visual diagnostics; the status indicator field is explicitly listed as None, so operational feedback is collected exclusively through firmware queries. Because expansion rack mounting is not supported, planners must reserve space in the primary chassis, but once installed the compact form factor and low power draw minimize heat generation and leave headroom for other peripherals in the rack.
Frequently Asked Questions about 3IF060.6 :
Q: How many module inserts can be placed in each slot of the 3IF060.6?
A: This module supports a single interface module insert per slot.
Q: Can the 3IF060.6 interface module be mounted on expansion racks?
A: The 3IF060.6 is designed exclusively for main rack mounting and does not support expansion rack mounting.
Q: What is the maximum power consumption of the 3IF060.6 module?
A: This module operates at a maximum total power consumption of 1 W at 5 V.
Q: What protection rating does the 3IF060.6 provide?
A: The 3IF060.6 interface module is built with IP20 protection, offering basic protection against solid objects.
Q: Are there status indicators available on the 3IF060.6 interface module?
A: The module does not include any status indicators on its housing.
