ECINT1-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation ECINT1-1 is part of the ECZ Multi Analog Modules series and features an RS232/RS485 interface type with a maximum baud rate of 115.2 kBaud. It has a current draw of 160 mA at 24 VDC, supports up to 32 network stations, and includes IP20 protection with overvoltage and reverse polarity safeguards.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ECINT1-1 interface module is manufactured by B&R Automation for installation in the ECZ Multi Analog Modules series backplane. Within a control cabinet, it links analog processing boards to serial field devices and allows data exchange with higher-level PCs, PLCs, and diagnostic tools through selectable serial communication. By translating local sensor values or command variables into serial messages, the module supports coordinated motion, batching, and process monitoring tasks in industrial automation lines. This arrangement lets locally acquired analog data be transferred to external control or visualization equipment without adding a separate standalone gateway.
The module draws 160 mA at 24 VDC, and its maximum power demand is 4.3 W, which keeps supply loading easy to predict. Communication takes place through a RS232/RS485 port, and the fastest operating mode reaches 115.2 kBaud. A single twisted-pair segment can include up to 32 stations, and status indication is provided by six LEDs. Automatic overvoltage and reverse-polarity protection help prevent wiring mistakes from damaging the board, and three software-selectable modes adjust handshaking and echo behavior for different serial devices. Multi-drop operation also allows several remote nodes to share one communication path instead of using separate point-to-point links.
The enclosure has an IP20 rating, so the module should be installed inside a closed cabinet away from conductive dust or liquids. When the unit is placed at the end of a serial line, a 120 ohm termination resistor can be enabled to reduce signal reflections. Upstream protection is provided by a 630 mA fuse that interrupts overcurrent faults before PCB traces overheat. Configuration and diagnostics can also be carried out from a laptop using a serial cable up to 10 m in length, which keeps setup access available from outside the immediate cabinet area. Separate surge suppression should be used for outdoor runs because lightning arrestors are not included.
Frequently Asked Questions about ECINT1-1:
Q: What is the current draw required by the ECINT1-1 module?
A: The ECINT1-1 operates with a current draw of 160 mA at 24 VDC.
Q: Which interface types does the ECINT1-1 support for communication?
A: The interface type supported by this module is RS232/RS485.
Q: How many network stations can be connected to the ECINT1-1 module?
A: The ECINT1-1 can support up to a maximum of 32 network stations.
Q: What is the protection rating for the ECINT1-1 module?
A: This model provides an IP20 protection type against ingress.
Q: How many status indicators are available on the ECINT1-1 module?
A: There are 6 status indicator LEDs present on the ECINT1-1.
