x20CA3E61.0150
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The x20CA3E61.0150, part of B & R Automation's CM16 Motor Cables series, features a specialized X20 connector and a cable length of 1.5 meters. The cable is rated for 24 V DC, a maximum current of 10 A, and has a wire cross-section of 1.5 mm². It is flame retardant and weighs approximately 200 grams.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
This x20CA3E61.0150 motor cable is 1.5 m (meters) long, has a specific X20 connection, and can handle 24 V DC (Twenty-Four volts of Direct Current). The CM16 Motor Cables from B & R Automation can handle up to 10 A (Ten Amperes) of current and work in temperatures between -20 degrees of Celsius and +60 degrees of Celsius (-4° F to 140° F and 253.15 K to 333.15 K). The motor cable is C-UL-US listed. When it comes to mounting method, this servo cable supports wall mounting. On the other hand, this motor cable also supports feed-through, or cold plate mounting.
For the DC (Direct Current) bus voltage, the voltage rating is 800 V DC (Volts of Direct Current), and the maximum voltage is 900 VDC (Volts of Direct Current). When it comes to DC bus capacitance, the rating is 1980 µF. This motor cable is RoHS-compliant. For the supply lines, the AWG rating is 2x 22 AWG, and the mm² rating is 2x 0.34 mm². The number of pins of this motor is 3. The Degree of protection rating for this motor cable is per EN 60529 IP67. The Max. internal resistance rating for this motor cable is 0.15 Ω. For the Continuous current, the assessment is 4.2 A (Amperes).
When it comes to Max. switching frequency, the rating is 0.5 Hz (Hertz). For the Max. over-current limitation, the value is 10 A (Ten Amperes). The Response threshold for cable breakage Monitoring is rated at Approx. 0.5 A (Amperes). The Modulation compared to ground potential rating for this motor cable is Max. ±38 V (Volts). For the EN 60529 protection, the x20CA3E61.0150 is protected by IP20.
Frequently Asked Questions about x20CA3E61.0150:
Q: What is the length of the X20CA3E61.0150 cable?
A: The cable length is 1.5 meters.
Q: What type of connector does this cable use?
A: It uses a specialized X20 connector.
Q: What is the rated voltage of this cable?
A: The rated voltage is 24 V DC.
Q: What is the maximum current rating for this cable?
A: The maximum current is 10 A.
Q: What is the wire cross-section size of the cable?
A: The wire cross section is 1.5 mm².
