8ECH0013.1111A-0
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The 8ECH0013.1111A-0 is a lightweight component weighing 145 grams, designed with IP20 protection and a plastic housing. Manufactured by B & R Automation as part of the CM16 Motor Cables series, it features a DIN Rail mounting type and supports EtherCAT communication with a maximum switching frequency of 10 kHz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8ECH0013.1111A-0 hybrid motor cable is designed by B&R Automation for precise signal transfer and connection in industrial automation. Because the cable combines the power and encoder lines into one, installation and routing are both made easier. The ACOPOS P3 servo drives, which necessitate constant power and feedback performance, are compatible with the 13-meter cable.
The 8ECH0013.1111A-0 hybrid motor cable weighs 3.1 kilograms and features 4x 1.5 mm² and 2x 0.75 mm² conductors. The foil shielding and tinned copper braiding of the cable give optical coverage of more than 85%. The standard conductor resistance for power lines is ≤13.3 Ω/km, whereas the 0.30 mm² encoder line is ≤68 Ω/km. When placed on the wall, it can withstand currents of up to 20.2 A. The cable can sustain three million or more flex cycles in drag chain applications at speeds up to 300 m/min and a minimum bend radius of 100 mm. The outer jacket's PUR composition protects it from wear and tear caused by continual mobility. Insulating the wires with thermally stable polypropylene (PP) is an excellent idea. The cable diameter of 13 mm ±0.4 mm ensures uniform routing. Certification standards include CE and UKCA. The hybrid cable's wire-to-wire and wire-to-shield isolation are tested at 4 kV. When the connectors are properly linked, the IP66/67 protection grade becomes active.
In both static and dynamic applications, the 8ECH0013.1111A-0 hybrid motor cable can withstand temperatures ranging from -20°C to +90°C. Less than 1500 mating cycles are supported by the Mini I/O encoder connector. Incorporating this cable into industrial automation systems necessitates the distribution of both signals and power with a minimum of physical degradation and signal loss. The motor cable satisfies all necessary electrical safety standards and provides continuous mechanical reliability.
Frequently Asked Questions about 8ECH0013.1111A-0:
Q: Why does the 8ECH0013.1111A-0 cable include both copper braiding and foil shielding layers?
A: It combines tinned copper braiding and foil to ensure over 85% optical coverage for effective EMI protection.
Q: How does the 8ECH0013.1111A-0 achieve high drag chain cycle performance?
A: The cable supports over 3,000,000 flex cycles due to its PUR outer jacket and controlled bend radius.
Q: Why does the 8ECH0013.1111A-0 use a 13 mm ±0.4 mm cable diameter?
A: This diameter ensures compact installation while maintaining internal conductor spacing and jacket integrity during movement.
Q: How does the 8ECH0013.1111A-0 maintain IP66/67 when connected?
A: It achieves IP66/67 by using sealed connectors that prevent dust ingress and water penetration under specified conditions.
Q: Does the 8ECH0013.1111A-0 support continuous motion in dynamic applications?
A: Yes, the cable allows continuous motion up to 300 m/min with a minimum bend radius of 100 mm in drag chains.
