8ECH0004.1111A-0
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The 8ECH0004.1111A-0 from B & R Automation is part of the CM16 Motor Cables series, designed with a rated output power of 1.5 kW and a cooling method via convection. It supports POWERLINK and Ethernet communication interfaces and operates at 3 x 380-480 V AC with an IP20 protection level.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
8ECH0004.1111A-0 is a B&R hybrid motor cable. Length of the cable is 4 meters. It connects servo drives from the ACOPOS series to compatible servo motor. Hybrid cables offer numerous benefits for operators. These cables combine several cables (power, signal, supply, etc.) into one, reducing cable bulk and the size of cable trays or conduits. With fewer cables to run, operators can set up equipment faster, cleaner, and the installations are less error-prone. Lower cable lengths, fewer connectors, and reduced labor translate into cost savings in both materials and time. Fewer connection points reduce the chances of failure. If a cable fails, it takes less time to identify the problem, and troubleshooting can be performed in less time. Diameter of the 8ECH0004.1111A-0 cable is 13 millimeters with 0.4 millimeters tolerance.
The specified minimum bend radii for single bends and moving cables are 40 millimeters and 100 millimeters respectively. Weight of this hybrid cable is approximately 0.96 kilograms. The outer jacket is orange and is made of PUR. There are 6 signal lines, 4 power lines, and 2 supply lines in the hybrid cable. Copper stranded wire with 1.5 mm2 cross-section is used for the power lines. Tinned copper stranded wires with 0.75 mm2 cross-section are used for the supply lines. Copper stranded wires with 0.3 mm2 cross-section are used for two of the signal lines and tinned copper stranded wires with 0.15 mm2 cross-section are used for four of the signal lines. The cable connector that connects to the motor is a Speedtec connector with 13 pins. The cable connector that connects to the encoder is a Mini I/O connector with 8 pins. Mating cycles for these connectors are 500 and 1500 respectively.
Frequently Asked Questions about 8ECH0004.1111A-0:
Q: What is the minimum bend radius?
A: The minimum bend radius for a single bend is 40 millimeters.
Q: What is the operating temperature?
A: The operating temperature is -20 to 90 ⁰C.
Q: Is the cable drag chain capable?
A: The cable is drag chain capable.
Q: What is the mating cycle limit for the Speedtec connector?
A: The mating cycle limit for the Speedtec connector is 500.
Q: What is the mating cycle limit for the encoder connector?
A: The mating cycle limit for the encoder connector is 1500.
