8CM005.12-1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The 8CM005.12-1 cable features a cable cross-section of 4x 1.5 mm^2 + 2x 2x 0.75 mm^2, operates up to 1000 V, and has an insulation resistance of over 40 Gohm. Part of the CM6 Series by B & R Automation, it includes an Intercontec 8-pin female motor connector and meets the IP67 protection rating when connected.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Motor cable with respect to the effectiveness cross section of 4x 1.5 mm^2 + 2x 2x 0.75 mm^2 and targeted to high voltage and high-performance usage. It may be emphasized that the 8CM005.12-1 corresponds exactly to these requirements. Apart from the above, this cable is also rated for CSA AWM I/II A/B category for temperatures 90 degrees Celsius and below1000 volts, EuroFL PolyNOR G8712/F2 FT2 LL46064 endorsement, confirming compliance with applicable safety and quality standards, has been acquired too.
This 8CM005.12-1 cable is built with both tinned copper wire and tinned copper litz wire that makes it a cable with high conductivity and good resistance to fatigue and wear. The insulation is made of a special thermoplastic, which provides maximum protection and yet enabling optimal pliability. Rated for one thousand volts, such a cable can safely be used in areas with very high voltage input. The cable is subjected to rigorous testing which includes 1500 VAC for both wire to wire and wire to shield applications prior to installation ensuring that it provides ultimate electrical insulation.
In the case of the 8CM005.12-1 wires used for power lines, a conductor resistance of 0.07 is applied whereas in the case of the signal wires it is 0.09. In that way one can be sure that there is both power and signal transmission. The insulation resistance, however, is greater than 40 Gohm which makes the cabling system reliable and effective in a broad range of situations. This cable is especially designed and constructed so that there is both warning and safety provided with the outer sheath in orange poly urethane (PUR), which is similar to RAL 2003 flat.
Frequently Asked Questions about 8CM005.12-1:
Q: What are the key specifications of the 8CM005.12-1 motor cable?
A: The cable features a cross-sectional configuration of 4x 1.5 mm^2 for power lines and 2x 2x 0.75 mm^2 for signal lines. It is designed for high voltage and high-performance usage, meeting stringent requirements for industrial applications.
Q: What certifications and standards does the 8CM005.12-1 motor cable comply with?
A: The cable is rated for CSA AWM I/II A/B category for temperatures up to 90 degrees Celsius and below 1000 volts. It is also endorsed by EuroFL PolyNOR G8712/F2 FT2 LL46064, confirming compliance with applicable safety and quality standards.
Q: What materials are used in the construction of the 8CM005.12-1 motor cable?
A: The cable is constructed with both tinned copper wire and tinned copper litz wire, providing high conductivity and resistance to fatigue and wear. The insulation is made of a special thermoplastic, offering maximum protection while maintaining flexibility.
Q: What are the electrical and insulation properties of the 8CM005.12-1 motor cable?
A: The cable is rated for 1000 volts and undergoes rigorous testing, including 1500 VAC for both wire-to-wire and wire-to-shield applications, ensuring excellent electrical insulation. The power line conductor resistance is 0.07 ohm, and the signal line resistance is 0.09 ohm. The insulation resistance is greater than 40 Gohm, ensuring reliability and effectiveness.
Q: What additional safety features does the 8CM005.12-1 motor cable have?
A: The cable is designed with an orange polyurethane (PUR) outer sheath, providing both visibility and safety. The sheath color is similar to RAL 2003 flat, ensuring the cable is easily identifiable in various industrial environments.
