8CCH02X5.11110-1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 8CCH02X5.11110-1 is a steel motor cable component with a zinc-plated finish and a weight of 0.132 kg. Manufactured by B & R Automation, it belongs to the CM16 Motor Cables series and features dimensions of 150 mm in length, 24 mm in width, and 11 mm in height. It operates within a temperature range of -40°C to +80°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
8CCH02X5.11110-1 is feedback cable. Its primary function is to connect encoders on B&R servo motors to servo drives in the ACOPOS product line. One end of the cable is terminated by a 17-pin EnDat connector. This female connector interfaces with the motor feedback system and is rated for fewer than 500 mating cycles. Its protection class, when properly connected, is IP66/67. The other end of the cable is terminated by a 15-pin DSUB connector. This male connector connects to the servo drive and supports less than 200 mating cycles. Its protection class is IP20 when it is properly connected. 8CCH02X5.11110-1 is a cable that is designed to resist standard and hydraulic oils. It is VDE 0472 compliant. The cable is certified to CE, UL, and UKCA standards. The 2 supply lines in the cable have a cross-section of 0.5 mm2.
These supply lines are made of tinned copper and thermoplastic material is used for the insulation. The cable contains 10 signal lines made of tinned copper, each with a cross-section of 0.14 mm². A special thermoplastic material is used for the wire insulation. Different colors are used for the insulations on the different signal lines. Copper braiding is used for the shield on the 8CCH02X5.11110-1 cable. The outer jacket of the cable is green and made of polyurethane. The operating voltage must not exceed 30 Volts. The wire to wire test voltage is 1 kilovolts and the wire to shield test voltage is 0.8 kilovolts. The moving operating temperature is -20 to 80 ⁰C and the static operating temperature is -20 to 90 ⁰C. The feedback cable is 12 meters long and weighs 0.96 kilograms.
Frequently Asked Questions about 8CCH02X5.11110-1:
Q: What is the application of this cable?
A: This feedback cable is used to connect ACOPOS servo drives and B&R servo motors
Q: Can the cable be used in drag chains?
A: The cable can be used in drag chains.
Q: What is the cable weight?
A: Weight of the cable is 0.96 kg.
Q: What is the maximum number of mating cycles?
A: Mating cycles for the EnDat connector should not exceed 500.
Q: Which material is used for the outer jacket?
A: The output jacket is made of PUR.
