8CCH0005.11120-1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The 8CCH0005.11120-1 is a compact motor cable accessory weighing just 0.10 kg with snap-on mounting. Manufactured by B & R Automation as part of the CM16 Motor Cables series, it features dimensions of 120 x 80 x 40 mm and complies with IEC 60529 standards. The accessory offers IP65 protection and operates between -25C and +70C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8CCH0005.11120-1 hybrid cable is designed by B&R Automation to connect ACOPOS remote or ACOPOSmotor drive units to ACOPOSmulti 8BVE expansion units. The cable is manufactured to be used in industrial automation that requires robust and reliable signal and power transmission.
The 8CCH0005.11120-1 hybrid cable has a length of 5 meters and incorporates a 15-pin female TYCO connector to provide compatibility with drive modules of B&R. The construction of the cable contains five power wires at a cross-sectional area of 2.5 mm², four signal wires at 0.75 mm², and four data wires at 0.34 mm². The outer covering is of PUR, that is made to last long and withstand abrasion. The cable has a maximum operating voltage of 1000 V for signal and power lines and 100 V for data lines. The product is marked with E130266 cURus, UL E225616, CSA, UKCA, and EC, which guarantees compliance with international standards. The cable has a maximum speed of drag chains of 300 m/min and a minimum bending radius of 150 mm while in motion. The drag chain flex cycles are a minimum of 5,000,000, that gives them long life in dynamic operations. The tinned copper braiding with optical coverage above 85% is used for the cable shield that gives good electromagnetic protection.
The 8CCH0005.11120-1 hybrid cable is ideal for moving applications with high mechanical performance and electrical reliability. The drag chain's maximum supported acceleration is 50 m/s². Maximum current-carrying capacity in cable tray is 29.1 A, and conductor resistance for power cables is ≤ 8 Ω/km5. The level of protection is IP65 according to EN 60529. The weight of the cable is 1.8 kg. The up to 20 mating cycles supported by the connector and cable that can be installed in cable trays, conduits, or wall mounting make it suitable for every application.
Frequently Asked Questions about 8CCH0005.11120-1:
Q: Does 8CCH0005.11120-1 support high-speed drag chain use?
A: Yes, the cable supports drag chain velocities up to 300 m/min and a minimum bend radius of 150 mm for flexible installations.
Q: Why is the shield coverage >85% in 8CCH0005.11120-1?
A: The tinned copper braiding with over 85% coverage ensures effective electromagnetic shielding that protects signal integrity.
Q: How does 8CCH0005.11120-1 achieve IP65 protection?
A: The cable and connector system are designed to meet EN 60529 IP65 that prevents dust ingress and low-pressure water jets.
Q: Do the power lines in 8CCH0005.11120-1 support high current?
A: Yes, the five power lines with 2.5 mm² cross section support up to 29.1 A in cable tray installations.
Q: Why is the insulation resistance ≥500 MΩ*km in 8CCH0005.11120-1?
A: High insulation resistance ensures minimal leakage current, that enhances safety and performance in electrical transmission.
