8ECR0005.1121C-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 8ECR0005.1121C-0 is part of the ACOPOS P3 Cables series and features a cable cross section of 3x 2x 24 AWG with tinned copper stranded wire. It has a PUR jacket, copper braid and foil shielding with at least 90% coverage, and its main connector is a 12-pin female from the Series 615. The cable supports more than three million flex cycles, a moving bend radius of at least 50 mm, and can handle a maximum velocity of 4 m/s.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8ECR0005.1121C-0 is a flexible servo cable from the ACOPOS P3 Cables series produced by B&R Automation. It carries control and feedback signals between compatible ACOPOS P3 drives and motors in demanding motion systems. Its flexible construction helps reduce conductor fatigue during constant movement while supporting stable signal transmission in automated equipment. This suits servo applications where clean feedback data and repeated motion must be maintained.
This model uses 3x 2x 24 AWG tinned-copper pairs inside a round cable with an overall diameter of 6.5 mm ±0.2 mm. A copper braid and foil shield provide ≥90 % shield coverage, which helps protect encoder data from electrical interference around drives and switching hardware. Insulation resistance exceeds >200 MΩ·km, signal-line resistance remains limited to 86 Ω/km, and a 12-pin female Series 615 connector supports secure connection at the device end.
The cable is rated for >3,000,000 flex cycles in continuous drag-chain service. It also supports a moving bend radius of ≤50 mm, which helps limit internal strand stress during repeated travel. Dynamic operation can reach ≤4 m/s with acceleration up to 6 g, and single setup loops may be formed down to 20 mm without jacket cracking. That combination supports fast pick-and-place axes that cycle constantly through short, repetitive travel paths.
Wake Industrial supplies a 1-year warranty on each cable. Same-day shipping can be arranged for urgent requirements, and quotations remain valid for 30 days. The chat tool available on the website can be used for general questions about type codes or fault codes.
Frequently Asked Questions about 8ECR0005.1121C-0:
Q: What conductor material is used in the 8ECR0005.1121C-0 cable?
A: The cable uses tinned copper stranded wire as the conductor material for reliable electrical performance.
Q: What type of connector is equipped on the 8ECR0005.1121C-0 cable?
A: A 12-pin female Series 615 connector is provided as the main connection interface for this cable.
Q: What shielding is used in the 8ECR0005.1121C-0 cable?
A: The cable features both copper braid and foil shielding, with a coverage of at least 90%.
Q: How many flex cycles can the 8ECR0005.1121C-0 cable endure?
A: This cable is designed to withstand over 3,000,000 flex cycles in dynamic applications.
Q: What jacket material is utilized in the 8ECR0005.1121C-0 cable?
A: The outer jacket is constructed from PUR, offering durability for industrial use.
