8ECM0025.1523C-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 8ECM0025.1523C-0 is part of the ACOPOS P3 Cables series and features an 8-pin female Speedtec motor connector with a connector size of 1.5. It has a cable cross section of 4x 10 mm² plus 2x 0.75 mm² and 2x 1.5 mm², and provides a wall mount current of 64.6 Amps. The cable is protected by a TPU outer jacket and offers an IP66/67 rating when connected.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8ECM0025.1523C-0 is a pre-assembled motor cable produced by B&R Automation for the ACOPOS P3 Cables series. It is intended for industrial automation layouts that place the drive inside a control cabinet while the synchronous motor is mounted on the machine frame. By routing three-phase power conductors and low-level feedback pairs through a single jacket, the cable reduces panel wiring and helps keep moving cable runs more organized. Its purpose is to carry drive output current, feedback signals, and protective earth between the P3 servo amplifier and the matching SpeedTec interface on the motor.
Its conductor stack is arranged as 4x 10 mm² + 2x 0.75 mm² + 2x 1.5 mm², so four power cores, two control pairs, and two service leads occupy a single bundle. Termination at the motor end uses an 8-pin female SpeedTec motor connector built to Size 1.5. Bayonet locking secures the interface, and all 8 contacts are wired. The finished assembly diameter is 20.1 mm ±0.4 mm, which is important when selecting drag-chain separators and cable glands. Each power core has a 10 mm² cross section and uses special thermoplastic insulation, while the two signal pairs use the same material. The cable includes four power lines and dedicated pairs for encoder or brake signals, and the internal separation helps limit crosstalk between circuits.
A TPU outer jacket provides abrasion resistance and flexibility, and when the connector is engaged the assembly reaches a sealing level of IP66/67 for operation in washdown or dusty areas. The dielectric layout is verified to withstand a system test potential of 4 kV, and the copper bundle supports a continuous wall-mount current of 64.6 A, matching the output range of the P3 inverter. These values support applications that require combined motor power transmission and isolated auxiliary signal routing in the same cable assembly.
Frequently Asked Questions about 8ECM0025.1523C-0:
Q: What type of connector is provided on the 8ECM0025.1523C-0 cable?
A: The 8ECM0025.1523C-0 cable is equipped with an 8-pin female speedtec motor connector.
Q: What is the maximum current rating for the 8ECM0025.1523C-0 ACOPOS P3 cable?
A: This cable can handle a wall mount current of 64.6 A.
Q: What material is used for the outer jacket of the 8ECM0025.1523C-0 cable?
A: The outer jacket of the 8ECM0025.1523C-0 is made from TPU, offering enhanced durability.
Q: What protection rating does the 8ECM0025.1523C-0 cable have during operation?
A: The cable features a protection rating of IP66/67 when connected.
Q: What is the overall diameter of the 8ECM0025.1523C-0 power cable?
A: It has a total cable diameter of 20.1 mm ±0.4 mm.
