Product Description:

The 8V1010.00-2 is a servo drive module manufactured by B & R Automation within the 8V1 ACOPOS Servo Drives series. Designed to control synchronous or induction servo motors, the unit converts the shared DC-bus voltage into precisely timed output phases so that individual machine axes follow commanded profiles in industrial automation cells. Its compact rating addresses mid-power axes in palletizers, feeders, and small gantries. The module is intended for applications that need accurate motion control without using a large cabinet footprint.

Its input stage includes a 24 Vdc buffer with 5600 µF of capacitance that maintains the control electronics during short mains drops, while the main DC link is stabilized by 165 µF so the power devices see low ripple under dynamic loads. During continuous operation, the inverter delivers 1 Aeff. Transient demands are handled with 2.8 Aeff, and motor energization at startup draws a nonrepetitive 2 A. The integrated IGBTs switch at 10 kHz, producing smooth current waveforms and limiting acoustic noise. With an installed load requirement of 1.35 kVA, the drive fits the compact mid-range of the platform and supports motor control without external chokes.

For application sizing, the drive supplies 0.45 kW of shaft power and integrates a dynamic braking resistor that dissipates 130 W continuously or up to 2 kW in short bursts, letting decelerating axes return energy without overvoltage. The control algorithms can issue output frequencies as high as 598 Hz, which suits light-inertia servo motors used in rapid indexing and pick-and-place tooling. The housing measures 58.5 mm in width, 220 mm in depth, and 257 mm in height, allowing dense cabinet layouts. A mass of 2.5 kg keeps the module relatively easy to mount on a rail or panel.