8JSA62.EA015D023-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8JSA62.EA015D023-0 is a synchronous motor in the 8JS Synchronous Motors series. It features flange mounting, a self-cooling method, and a nominal speed of 1500 RPM. This model uses an inductive EnDat 2.1 single turn encoder with a precision of ±180 arcsec and a resolution of 19/0 bits.
Internal Product Review
The 8JSA62.EA015D023-0 is a B & R Automation 8JS series synchronous motor with self-cooling and flange mounting. The inductive EnDat 2.1 encoder and ±180 arcsec precision support accurate feedback and dependable motion control. An angled swivel connector and 1500 RPM nominal speed make this motor a strong choice for efficient machine integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
B & R Automation produces the 8JSA62.EA015D023-0 as part of its 8JS Synchronous Motors series. The motor serves as a permanent-magnet drive element that converts commanded electrical energy into accurately regulated rotation for pick-and-place stations, indexing tables, and packaging axes. A single-turn inductive encoder on the rotor supplies absolute position data to the drive, while the size 6 frame and length code 2 keep the assembly short enough for tight machine envelopes.
The motor’s rated operating speed is 1500 rpm, so mechanical transmission components can be selected for continuous duty at that velocity without requiring additional overspeed capacity. Feedback accuracy comes from an encoder precision of ±180 arcsec, meaning the maximum deviation between the measured and actual angles stays within this narrow range. The encoder has a resolution of 19/0 bits, providing 524,288 discrete positions per revolution on the single-turn scale and enabling smooth velocity regulation at low speeds. Thermal management relies on self-cooling, so the housing fins dissipate heat by natural convection without an external fan or liquid circuit. Power, feedback, and brake conductors enter through an angled swivel connector, allowing the cables to pivot and reducing strain when the motor is mounted in confined spaces or on moving carriages.
The motor uses flange mounting, aligning the pilot diameter with gearboxes or machine plates and eliminating the need for foot-mounting hardware. The output is a smooth shaft, making it suitable for clamp hubs or shrink-fit couplings where minimal backlash is required. Because the unit is supplied without a holding brake, the machine must rely on drive torque or external locks to secure vertical axes when power is off. Position data travels over the inductive EnDat 2.1 interface, which supports digital diagnostics and automatic parameter transfer. The lack of an oil seal lowers shaft friction and is suitable for installations where the shaft is not exposed to oil or similar contaminants.
