Product Description:

B&R Automation manufactures the 8CCH02X5.11130-1, a hybrid cable belonging to the 8CC ACOPOSremote Hybrid Cables series. The assembly is intended for power distribution and real-time communication between an ACOPOSremote servo module mounted on the machine and the base drive controller located in the control cabinet. By routing three conductor groups—power, auxiliary signals, and digital data—within one jacket, the product reduces wiring complexity, eliminates separate feedback leads, and maintains the deterministic timing required in industrial automation networks.

Electrically, the hybrid line has an outside diameter of 14.6 mm ±0.4 mm, a size that fits standard drag-chain clamps while helping keep the minimum bend radius low. Its factory-terminated length of 2.5 m allows cabinet-to-module connections without excess slack. Five power cores rated at 2.5 mm² can carry up to 29.1 A when the cable is installed in a tray, supplying drives that draw moderate continuous current. Control and diagnostics travel through a 15-pin female TYCO connector, and the housing integrates all 15 contacts so no additional plugs are needed. An enclosure rating of IP65 at the mating interface protects against dust ingress and water jets, supporting installation on open machine frames.

The unified conductor set of 5x2.5 + 2x2x0.75 + 2x2x0.34 mm² keeps power lines separated from the two twisted-pair signal bundles and the two twisted-pair data bundles, minimizing crosstalk. All conductors use Tinned copper stranded wire, and filler elements plus an additional foil help maintain consistent roundness. Over the core, a foil wrap and tinned copper braid form the cable shield that provides 360-degree EMC coverage. Individual signal pairs are insulated with PE, while the overall outer jacket is molded from PUR for abrasion and oil resistance. Despite the multilayer build, the finished assembly weighs only 0.9 kg, easing cable-track loading during dynamic motion.