8CCH01X3.11110-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 8CCH01X3.11110-1 hybrid cable belongs to the 8CC ACOPOSremote Hybrid Cables series and features a 15-pin female TYCO connector with a 29.1 amp current capacity. It has a PUR jacket, an IP65 protection rating, and a moving bend radius of at least 150 mm. The cable supports over 5 million flex cycles and operates with a power line voltage up to 1000 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8CCH01X3.11110-1 hybrid cable is produced by B&R Automation within the 8CC ACOPOSremote Hybrid Cables series. It integrates power conductors, signal pairs, and data lines into one routed assembly, simplifying installation between ACOPOSremote servo drives and centralized controllers. In plant automation, this product supplies drive voltage, auxiliary power, and deterministic communication over a single flexible link, reducing panel volume and cable count on moving machine axes.
The conductor set is arranged as 5x 2.5 mm² + 2x 2x 0.75 mm² + 2x 2x 0.34 mm², so three-phase supply, auxiliary services, and twisted data pairs each have a dedicated gauge sized for their expected load. A 15-pin female TYCO connector terminates the cable, and its 15 contacts match the internal pinout of the ACOPOSremote drive. The tray-rated copper can carry 29.1 A, allowing several axes to share a trunk without overheating. Dielectric spacing on the power cores supports operation at voltages of ≤1000 V, while the signal pairs are limited to 100 V for low-voltage communication. A PUR outer jacket resists oil and coolant, and the special stranding permits continuous motion inside drag chains moving at 300 m/min without exceeding tensile stress. An overall shield and individual pair foils reduce crosstalk between the mixed-purpose conductors.
Dynamic fatigue life is verified for ≥5,000,000 flex cycles, provided the cable is installed with a moving bend radius of ≥150 mm. The tinned-copper braid delivers >85% coverage, supplying low-impedance paths for common-mode noise and improving EMC compliance. Electrical integrity is supported by insulation resistance of 500 MΩ·km, limiting leakage on long runs. When the molded plug is latched, the assembly meets the IP65 protection class, blocking dust ingress and low-pressure water jets commonly encountered on gantry carriages. The hybrid cable maintains stable power and data transmission on high-speed pick-and-place systems, packaging lines, and other mobile automation modules.
Frequently Asked Questions about 8CCH01X3.11110-1:
Q: What is the flex cycle rating of the 8CCH01X3.11110-1 hybrid cable?
A: The 8CCH01X3.11110-1 cable is rated for at least 5,000,000 flex cycles, making it suitable for demanding motion applications.
Q: Which connector type is featured on the 8CCH01X3.11110-1 cable?
A: The 8CCH01X3.11110-1 comes equipped with a 15-pin Female TYCO connector.
Q: What is the maximum current capacity of the 8CCH01X3.11110-1 cable in tray use?
A: This cable supports a current capacity of up to 29.1 A when installed in a cable tray.
Q: What level of environmental protection does the 8CCH01X3.11110-1 cable provide?
A: The 8CCH01X3.11110-1 cable is rated IP65 for protection against dust and low pressure water jets.
Q: What type of outer jacket material is used on the 8CCH01X3.11110-1 hybrid cable?
A: The jacket of the 8CCH01X3.11110-1 cable is constructed from PUR material.
