Product Description:

The 8CCH00X9.11230-1 hybrid assembly is a pre-terminated cable manufactured by B & R Automation within the 8CC ACOPOSremote Hybrid Cables series. Serving as the single trunk between a control cabinet and decentralized ACOPOSremote drive modules, it carries three separate circuits for power, servo feedback, and real-time communication within one outer jacket. In machine-building environments, this configuration reduces wiring complexity while providing the power and deterministic data flow required for coordinated multi-axis motion.

At the drive end, the bundle is fitted with a 15-Pin Female TYCO connector, which consolidates energy and signal contacts in one interface. The four data pairs each use conductors of 0.34 mm², a size that helps keep impedance stable for high-speed digital protocols while limiting cable diameter. Power delivery is handled by five cores with a cross section of 2.5 mm², enough to carry the phase current required by ACOPOSremote inverters. During dynamic carrier motion, the cable tolerates peak accelerations of 50 m/s² and linear travel up to 300 m/min without exceeding bending radius limits or introducing crosstalk. Supplemental signal conductors measure 0.75 mm² and are provided in a set of four for sensor voltage or brake control lines. The PUR sheath resists oil, coolant, and weld spatter.

For long-term durability, the hybrid design is rated for 5,000,000 flex cycles in energy chains and withstands up to 20 mating operations before connector wear becomes significant. The molded strain relief keeps the overall outside diameter to 14.6 mm, allowing the cable to share existing drag-chain compartments with pneumatic hoses. An ingress protection grade of IP65 permits installation on moving axes exposed to dust and low-pressure washdown. Despite the multiple conductor sets, total mass is only 0.32 kg per standard length, which helps limit the load placed on carriage bearings and servo drives during high-frequency positioning.