8CCH0009.11110-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 8CCH0009.11110-1 is part of the 8CC ACOPOSremote Hybrid Cables series and features a 15-pin female TYCO connector with 15 contacts. It has a PUR jacket, offers an IP65 protection rating, and supports power voltage up to 1000 V and wall mount current of 23.7 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8CCH0009.11110-1 hybrid cable is manufactured by B & R Automation within the 8CC ACOPOSremote Hybrid Cables series. Designed for combined power and signal transmission, it supports distributed drive topologies where modules are mounted on the machine rather than in the cabinet. The assembly integrates separate conductor groups so a single run can supply operating voltage while also returning feedback data, reducing installation time and saving space in high-cycle energy-chain applications found in packaging, material handling, and process lines.
Its interface to the module is a 15-pin female TYCO connector that uses all 15 contacts defined for this family. The internal layout follows a bundled cross section of 5×2.5 mm² for mains, 2×2×0.75 mm² for auxiliary power, and 2×2×0.34 mm² for communication, allowing balanced impedance between functions. In wall-mounted installations, the conductors can carry 23.7 A while the supply remains within the declared ≤1000 V limit, and the separate data pairs operate at ≤100 V. The molded backshell and overmold give the plug an IP65 ingress rating after coupling, so cabinet-free installation is possible on machines that are washed down or exposed to dust. Mechanical wear is limited because the design endures ≥5,000,000 bending cycles, and the coupling hardware is specified for 20 mating cycles, supporting periodic service without connector replacement.
In dynamic drag-chain runs, the cable can travel up to 300 m/min without exceeding the minimum bend radius. Signal integrity is maintained by an overall tinned-copper braid that provides >85% coverage and keeps crosstalk low, while the dielectric yields an insulation resistance of ≥500 MΩ·km and the copper conductors limit power drop to 8 Ω/km over long distances. A tough PUR jacket protects the bundle from oils, coolants, and UV light while remaining flexible at high speeds. The shielded conductor groups allow power and communication circuits to run in the same cable while limiting interference during motion.
Frequently Asked Questions about 8CCH0009.11110-1:
Q: What connector type is featured on the 8CCH0009.11110-1 hybrid cable?
A: The 8CCH0009.11110-1 cable uses a 15-pin female TYCO connector.
Q: What is the maximum power voltage rating of the 8CCH0009.11110-1?
A: This cable supports a maximum power voltage of up to 1000 V.
Q: How many flex cycles is the 8CCH0009.11110-1 cable rated for?
A: The 8CCH0009.11110-1 has a flex cycle rating of at least 5,000,000 cycles.
Q: What is the protection rating of the 8CCH0009.11110-1 cable?
A: It has an IP65 protection rating, protecting against dust and water jets.
Q: What is the jacket material of the 8CCH0009.11110-1 hybrid cable?
A: The outer jacket of this cable is made from PUR (polyurethane) material.
