Product Description:

The 8CCH0006.11340-1 is a hybrid power-and-signal cable from the 8CC ACOPOSremote Hybrid Cables series manufactured by B&R Automation. It combines motor power conductors, control pairs, and digital feedback pairs in one assembly so drives in a decentralized ACOPOSremote system can be linked to the cabinet through a single routed line. This arrangement reduces panel wiring and supports quick installation in industrial automation where distributed servo modules must receive both power and high-speed data.

The cable core contains a 5× 2.5 mm² + 2× 2× 0.75 mm² + 2× 2× 0.34 mm² layout that separates power, 24 V control, and differential signal pairs to reduce crosstalk. Tinned copper stranded conductors and a tinned copper braid plus foil shield limit voltage drop and provide EMC suppression that remains effective through at least 5,000,000 flex cycles. For routing inside energy-chain carriers, the design tolerates a moving bend radius of ≥150 mm, which helps prevent conductor fatigue in dynamic gantries. A PUR outer jacket resists oil, weld spatter, and UV exposure, while molded ends carry a 15-pin female TYCO connector with 15 contacts that mates directly to ACOPOSremote modules. The finished assembly has an IP65 ingress rating, so dust and washdown spray do not penetrate the connector interface.

Power conductors can carry machine supply potentials up to ≤1000 V, and the separate data pairs remain isolated for signal levels up to ≤100 V. This separation is supported by a power line resistance of 8 Ω/km, which helps keep I²R losses low over typical cable runs. Electrical integrity during long travel is maintained by an insulation resistance of ≥500 MΩ·km and braid-plus-foil coverage of >85%, which helps preserve stable impedance for high-speed feedback. The cable is intended for continuously moving axes that require low attenuation and reliable sealing.