Product Description:

The 8CCH0005.11110-1 hybrid cable is manufactured by B & R Automation as part of the 8CC ACOPOSremote Hybrid Cables series. It is a pre-assembled connection that carries power, control signals, and high-speed data to remote ACOPOSmotor or ACOPOSservo modules in distributed automation lines. By integrating these channels into a single assembly, the product simplifies routing inside drag chains and shortens installation time on packaging machines, material-handling gantries, and other motion systems.

At the cabinet end, a 15-pin female TYCO connector terminates the cable; its keyed shell houses the full 15 contacts required for the hybrid interface and ensures mating compatibility with the ACOPOSremote backplane. Five power conductors with a cross-section of 2.5 mm² deliver the continuous current required by the inverter stage, while four signal pairs and four data pairs carry control and fieldbus traffic inside the PUR outer jacket. The cable is rated for ≥5,000,000 bending cycles, making the assembly suitable for high-speed pick-and-place axes. When coupled, the connector and molded strain relief provide an environmental seal rated at IP65, allowing installation on moving axes exposed to coolant spray.

Electrical integrity is reinforced by a tinned copper braiding + foil shield that attenuates electromagnetic interference across the entire cable length. Inside the shield, the four data cores each feature a cross-section of 0.34 mm², providing consistent impedance for real-time bus traffic, while the four dedicated signal conductors use a larger 0.75 mm² profile to accommodate brake and sensor currents. The insulation system offers resistance of at least 500 MΩ·km, limiting leakage and supporting reliable feedback signals even on extended runs. The connectors are rated for a maximum of 20 mating operations, which helps preserve pin plating quality when the cable is disconnected and reconnected in modular machine frames.