8BVF0880H000.000-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8BVF0880H000.000-1 is part of the 8BVF ACOPOS Multiline Filters series and weighs 23.5 kilograms. This filter features a continuous current rating of 90 Aeff, a peak current of 180 Aeff, and has a power dissipation of 980 watts. Its enclosure is rated IP20, with dimensions of 436 mm in height, 175 mm in width, and 212 mm in depth.
Internal Product Review
The 8BVF0880H000.000-1 is an 8BVF ACOPOS Multiline filter engineered for dependable drive system integration, with IP20 protection and EN 61800-3 C3 compliance. Continuous 90 Aeff current handling and 180 Aeff peak capacity support stable performance under demanding load conditions. A strong choice for high-current automation cabinets.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8BVF0880H000.000-1 is a line-side filter module produced by B & R Automation for the 8BVF ACOPOS Multiline Filters series. Installed between the plant mains and the ACOPOS drive system, the unit suppresses conducted emissions and limits reflected harmonics so that multi-axis motion platforms meet industrial electromagnetic compatibility rules. By providing this conditioning function, the filter protects upstream supply components while allowing the drives to operate with high switching frequencies in automated machinery and material-handling cells.
This filter is dimensioned for a continuous phase current of 90 Aeff; during short overloads lasting under ten seconds it tolerates up to 180 Aeff. The housing carries a IP20 ingress rating, so the module must be mounted inside a closed control cabinet where only limited finger protection is required. Internal losses under rated load reach 980 W, a figure the user must account for when sizing cabinet ventilation. Compliance with category EN 61800-3 C3 confirms that, when installed per manufacturer guidance, the filter keeps conducted emissions below limits intended for industrial low-voltage networks without residential exposure.
The thermal design supports ambient temperatures up to 55 °C, and forced convection is assisted by a separately powered 24 VDC fan so the unit maintains full current capability at elevated cabinet temperatures. With a mass of 23.5 kg and overall dimensions of 436 × 175 × 212 mm, the filter adds structural load and depth that must be considered during panel layout. Its reactive network presents a discharge capacitance of 14.1 µF, which influences residual voltage decay after power is removed and may require bleed-down time before service work. Operation is allowed up to 4000 m above sea level, ensuring current derating is unnecessary for the majority of industrial sites located below this altitude.
