8B0F0160H000.000-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8B0F0160H000.000-1 is part of the 8B0 ACOPOS Multi Power Supplies series and provides a continuous current of 16 Amps with a peak current up to 24 Amps. It is wall mounted, rated for a maximum input voltage of 3x 528 VAC, and has an IP20 degree of protection. The power supply weighs 0.85 kilograms and measures 263.8 mm in height, 45 mm in width, and 70 mm in depth.
Internal Product Review
The 8B0F0160H000.000-1 is an 8B0 ACOPOS Multi power supply engineered for motion systems, delivering 16 Aeff continuous current and 24 Aeff peak current. IP20 protection with wall mounting simplifies cabinet installation and suits controlled industrial environments. A well-engineered unit for ACOPOS platforms, especially where input handling up to 3x 528 VAC is required.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8B0F0160H000.000-1 power module is produced by B&R Automation and belongs to the 8B0 ACOPOS Multi Power Supplies series. As a regulated front end for the ACOPOS Multi servo system, it converts three-phase mains power into a stable DC link that feeds multiple axes in coordinated motion cells. The module is intended for wall mounting inside control cabinets where space is limited, and it provides the electrical backbone for compact, high-performance automation lines.
Its continuous output capacity reaches 16 Aeff, enabling sustained delivery of bus energy to several inverter sections, while short periods of high electrical demand are supported by a peak rating of 24 Aeff for less than one minute. The input stage tolerates line voltages up to 3 × 528 VAC and accepts network frequencies up to 60 Hz. Line-to-ground leakage is limited to 33 mA at 400 VAC, and a discharge capacitance of 0.4 µF allows stored energy to dissipate quickly after shutdown. The unit is classified in Overvoltage Category III and withstands distribution-level transients. The enclosure has an IP20 protection rating, allowing air exchange while helping prevent finger contact with internal components after the module is mounted on the cabinet backplate.
Internal power dissipation is limited to 6.1 W, reducing the amount of heat released into the control cabinet. The module can operate at installation altitudes up to 4000 m without derating, making the power supply suitable for elevated locations. The aluminum housing weighs 0.85 kg, helping keep the overall cabinet assembly light. The module measures 263.8 mm in height and 45 mm in width, with a depth of 70 mm. These dimensions allow the unit to be installed closely beside compatible inverter modules on the same mounting surface while maintaining the clearances required for the wall-mounted arrangement.
