Product Description:

The 5D5212.27 is an operator interface panel produced by B&R Automation and assigned to the 5D5 Provit Interface Panels series. It functions as the visualization and command point in automated machinery, allowing operators to start, stop, monitor, and adjust processes directly at the equipment without relying on external PCs or separate input devices during normal machine operation. The integrated hardware supports the Provit runtime so graphic screens, alarm messages, status pages, and parameter dialogs are rendered locally while control logic continues to run in the connected PLC or motion controller.

Graphic clarity is supplied by a 15 in diagonal display that uses Color TFT technology for clear presentation of process variables, menus, and alarm states. The native resolution is XGA, providing 1024 × 768 addressable pixels so trend lines, numeric values, and small status icons remain legible at typical viewing distances on a machine front. Touch input relies on a Resistive sensor layer, which recognizes finger pressure or stylus contact even through thin gloves. The front bezel spans 420 mm in width, leaving room for soft keys and indicator LEDs alongside the active screen without increasing enclosure depth.

The panel face meets NEMA 4 criteria, and the overall construction carries an IP65 protection rating, so the electronics are protected from water jets, incidental spray, and airborne dust when the unit is mounted correctly. Overall height is 330 mm, which helps the panel fit standard cabinet cutouts while preserving enough bezel area around the gasket for a secure seal. As part of the 5D5 Provit Interface Panels series, the unit is suitable for machine installations that require a sealed front interface and local process visualization in washdown or dusty production areas. This arrangement supports use on packaging equipment and other enclosed industrial machines that need a sealed operator interface.