5D5200.04 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 5D5200.04 interface panel is part of the 5D5 Provit Interface Panels series and features a 13.8 inch TFT color display with a resolution of 640 x 480 pixels. Its front is protected to IP65 and NEMA 250 Type 4X standards, with a polyester foil and anodized aluminum frame. The panel uses an Accu Touch analog resistive touch system and offers a brightness of 180 cd/m².
Internal Product Review
The 5D5200.04 is a 5D5 Provit interface panel with a TFT color display and 640 x 480 resolution. Accu Touch input and IP65 / NEMA 250 Type 4X front protection support accurate operation and dependable service in industrial settings. A very capable HMI panel, especially where sealed front protection is a priority.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5D5200.04 is a human-machine interface panel manufactured by B & R Automation for the 5D5 Provit Interface Panels series. The unit mounts on machine fronts to give operators direct visual feedback and command entry for PLC-controlled processes. Its 13.8-inch TFT screen, sealed bezel, and resistive touch layer make it suitable for production lines that need reliable local control without exposing internal electronics to dust, moisture, or mechanical damage.
Visual clarity comes from a brightness level of 180 cd/m² and a native resolution of 640 × 480 pixels, allowing operators to read status data and alarms without pixelation. The active area spans a diagonal of 13.8 inches (350 mm). The panel uses a TFT color display with CFL backlighting, and its lamps are rated for 10,000 hours of operation. A polyester foil overlays the viewing window, while an anodized aluminum frame surrounds the perimeter to resist surface abrasion. A flat gasket is bonded around the front to block spray ingress. The overall housing measures 392 × 296 × 52 mm, giving it a shallow profile for installation in enclosure doors.
On the installed machine face, the front side carries a protection rating of IP65 / NEMA 250 Type 4X, so washdown cleaning and airborne particles will not expose the electronics. The rear side remains open to the cabinet interior and is limited to IP20, making it suitable for installation within typical control enclosures. Communication with the host controller can extend up to 10 m, enabling remote panel placement on swing arms or operator stations. Commands are entered through the Accu Touch system, which uses an analog resistive sensor stack. This input technology supports gloved operation without affecting coordinate accuracy, making the panel practical for industrial environments where direct skin contact with the screen may not be possible.
