5D2200.10 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The 5D2200.10 pressure relief valve supports subplate mounting, handles a maximum operating pressure of 350 bar, offers a flow rate of up to 100 liters per minute, and weighs approximately 1.2 kg. Part of the 5D2 Control Display Panels by B & R Automation, it features NBR seals and operates efficiently within a temperature range of -20°C to +80°C.
Internal Product Review
The 5D2200.10 from B & R Automation is a member of the 5D2 Control Display Panels line. It may be mounted on a subplate. This pressure relief valve can handle flow rates of up to 100 l/min and a maximum working pressure of 350 bar. It can work in temperatures from -20°C to +80°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
B & R Automation makes the 5D2200.10, which is part of the 5D2 Control Display Panels range. It can operate in temperatures between -20° C and +80° C. B&R Automation designed the 5D2200.10 touchscreen to be a useful way for people and machines to talk to each other on its IPC2000 and IPC2001 generations of industrial PCs. The chassis is strong enough to handle the bumps and wetness that are prevalent on manufacturing floors. Installers like that it can be fixed flat, panel-mounted, or hung up to fit in small or large spaces. The image is handled by a thin-film-transistor core, and the text and icons are so clear that light doesn't cause an issue. The display becomes brighter with compact fluorescent bulbs, reaching roughly 200 candela per square meter.
This means that the reading stays legible even in bright sunshine. Because the touch assembly is an analogue resistive kind, which is less glamourous than projected capacitive but better at handling fluids and impact, users tap on the surface using gloves, sleeve cuffs, or a hard-plastic stylus. The display will last at least five years under normal industrial stress since it has been put through a lot of heat and vibration tests.
The standard says that the screen may be up to 10 meters away from the controlling IPC for cable runs. This gives project engineers important space when they are routing harnesses via steel conduits or overhead trunking. After the initial setup, the display unit only has to be serviced once in a while, making it a good choice for those who want technology that doesn't need a lot of work. The product has been approved by international authorities.
