5D2200.07 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 5D2200.07 is a control display panel from the 5D2 Control Display Panels series, equipped with a 10.4 inch color TFT display and 262,144 colors. It offers a resolution of 640 x 480 pixels, brightness of 200 cd/m², and uses a CFL backlight with a 25,000 hour lifespan. The panel features analog resistive touch technology, IP65 front protection, IP20 rear protection, and supports operation from 0 to 50 degrees Celsius.
Internal Product Review
The 5D2200.07 is a B & R Automation control display panel with a color TFT display and analog resistive touch technology. IP65 front protection and 200 cd/m² brightness support dependable operation in industrial environments. A 25,000 h CFL backlight is a strong advantage for long service intervals.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5D2200.07 display panel is produced by B & R Automation within the 5D2 Control Display Panels series. It functions as the primary human-machine interface on machinery, letting operators issue commands, view status graphics, and acknowledge alarms in real time. By combining a color active-matrix screen with integrated touch input, the unit removes the need for separate push-button stations and streamlines control-cabinet layouts in automated production lines. This arrangement also allows machine status, alarm pages, and operating screens to be presented from one centralized interface instead of being divided across several devices.
The panel’s luminance reaches 200 cd/m², providing sufficient legibility under standard indoor factory lighting. Its native resolution of 640 x 480 px matches the VGA signal format used by many legacy PLC visualization packages, so screen graphics render without scaling artifacts. Control inputs are registered through an analog resistive touch layer that detects pressure from gloved fingers or stylus tips, avoiding the need for capacitive-specific tooling. The device operates reliably between 0 to 50 °C, allowing installation in non-conditioned cabinets close to the process. A molded aluminum front frame carries an IP65 rating, preventing dust ingress and low-pressure water-jet exposure during wash-down maintenance. The touch-based interface also supports direct interaction with on-screen controls, which helps simplify routine machine operation where fast screen changes and acknowledgment functions are required.
The color TFT module spans 10.4 in (264 mm) on the diagonal, giving operators a moderate viewing area without occupying excessive panel space. Its pixel engine can render 262,144 colors, allowing clear distinction between status icons and alarm shades in SCADA screens. Illumination is supplied by a CFL backlight designed for 25,000 h of service before brightness falls to half of the initial value, which lengthens maintenance intervals in continuous-duty equipment. While the front resists industrial contaminants, the enclosure rear carries an IP20 category, so installation inside a control cabinet is required to guard against accidental contact and particle exposure. This layout suits equipment in which the operator-facing surface must withstand routine cleaning while the rear of the unit remains protected by the surrounding enclosure.
