Product Description:

The 5CAUPS.0010-01 is a dedicated interface cable produced by B & R Automation for the 5CA HMI Cables series. It links low-voltage control circuitry to operator panels inside automated machinery, carrying power and signals without extra adapters. By matching the pinout and mechanical format used by B & R HMI systems, the cable simplifies installation and keeps conductor sizing consistent throughout a machine build.

With an overall diameter of 7 mm, the assembly fits standard cable glands while accommodating a mixed conductor set of 2 × 0.5 mm² and 2 × 2.5 mm². The factory-terminated length of 1 m suits panel-to-door or hinge routing where limited slack is available for strain relief. Power and signal leads terminate on a 4-pin screw clamp terminal block, allowing direct insertion into pluggable headers on the HMI. The copper cross-sections support a continuous load of 10 A at 20 °C, and the insulation system permits a working potential of up to 30 VDC. For stationary wiring, the minimum bend radius is 5× the wire diameter, while dynamic cable-chain applications require 10× to help prevent conductor fatigue. The larger 2.5 mm² pair has a maximum resistance of 7.98 Ω/km, which helps maintain voltage stability over short runs.

The outer sheath is colored Window Gray to match B & R panel harness coding, and it is made from PVC-based thermoplastic that withstands repetitive motion without cracking. For the finer 0.5 mm² leads, the DC loop resistance is 39 Ω/km max., helping keep signal drop within logic thresholds over modest distances. Dielectric integrity is verified through a 1500 V wire-to-wire test, providing a safety margin above the working level. These material and electrical properties support routing inside moving operator arms and compact control cabinets.