5CASDL.0050-01 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 5CASDL.0050-01 is a cable from the 5CA HMI Cables series, featuring a length of 5 meters and a maximum cable diameter of 9 millimeters. It includes 2 DVI-D (24+1) male connectors with gold-plated contacts, offers mechanical protection with a metal cover and crimped strain relief, and uses a PVC jacket in black. The cable has a shield made from tinned copper braid with over 85 percent coverage and supports an operating voltage up to 30 volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
B&R Automation manufactures the 5CASDL.0050-01, an HMI extension cable in the 5CA HMI Cables series. The assembly carries digital video signals between a machine-mounted panel and the controller hardware, supporting clear image transmission over longer runs common in packaging lines, robotics cells, and process skids. Use of this pre-terminated cable simplifies installation by eliminating field crimping during panel integration, while its series-specific construction ensures electrical compatibility with B&R Automation operator terminals.
The cable is supplied in a nominal length of 5 m with a ±50 mm tolerance, and this predefined run reduces signal attenuation calculations on site. Overall outer diameter reaches 9 mm, so the required minimum bend radius is five times that value, a limitation that protects the internal video pairs from micro-breaks during routing through conduits. Each conductor is sized at 28 AWG, limiting resistive losses to 237 Ω/km and keeping impedance within the DVI standard. A maximum working voltage of 30 V accommodates the low-level signaling present on the TMDS lines, and insulation resistance is rated at 10 MΩ/km to prevent leakage paths that could distort differential waveforms.
At each end, the assembly terminates with 2x DVI-D (24+1) male plugs for direct connection to compatible ports. Gold-plated contacts provide low contact resistance and resist oxidation. The connectors are qualified for 100 mating cycles before signal quality may degrade, and a metal shell with crimped strain relief protects the solder joints from axial pull. A tinned copper braid with >85% optical coverage surrounds the twisted pairs to reject electromagnetic interference, while the black PVC jacket resists oils encountered in control enclosures.
Frequently Asked Questions about 5CASDL.0050-01:
Q: What is the total length of the 5CASDL.0050-01 HMI cable?
A: The 5CASDL.0050-01 cable is 5 meters long, with a tolerance of plus or minus 150 millimeters.
Q: What connector type is used on the 5CASDL.0050-01 cable?
A: This cable comes with two male DVI-D (24+1) connectors for high-quality digital video connections.
Q: What is the jacket material and color of this cable?
A: The jacket of the 5CASDL.0050-01 cable is black and made from PVC for insulation and protection.
Q: What bend radius should be maintained when installing the 5CASDL.0050-01 cable?
A: A minimum bend radius of at least five times the cable diameter is required for this cable.
Q: What type of shielding does the 5CASDL.0050-01 cable feature?
A: The shield braid is made of tinned copper and provides more than 85% coverage for effective signal protection.
