5AP92D.1906-I00

Product Description:

5AP92D.1906-I00 is an automation panel for industrial PCs from B & R Automation. It has a large 19 inch shatter proof display. The display supports single-touch via analog resistive technology. The panel overlay is fully laminated. Front side of the panel is IP69K rated. This means the front side is dust-tight and protected against high-pressure and high-temperature water jets. Therefore, the panel is suitable for very demanding environments where both dust and water exposure at high pressure are common. Back side of the 5AP92D.1906-I00 is IP66 rated, meaning it is protected against dust and other small particles and can withstand high-pressure water jets from any direction. The automation panel mounts on a Rittal CP-S steel swing arm. The flange is not supplied with the panel. A USB port is available on the back side of the unit.

The 5AP92D.1906-I00 is approved by CE and UL but not by HazLoc. Its TFT color display supports 16.7 million colors at a resolution of 1280 x 1024 pixels (SXGA resolution). The working contrast ratio is 1500:1. Horizontal viewing angles for the unit are 85 degrees from the left and right. Vertical viewing angles for the unit are 85 degrees from the top and bottom sides. Brightness of the LED backlight can be varied from 35 to 350 cd/m2. When operated at 25 degrees Celsius, the 70,000 hour rated half-brightness time can be increased by half if the brightness is reduced by half. A 12-bit serial B & R controller enables analog resistive touch technology for the display. The touch screen can support transmittance of up to 78%. Mechanical specifications for the unit include 10 kilograms weight and 514 x 420 x 78.5 millimeter dimensions.