4P3040.00-K50 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
26 Seconds
The B & R Automation 4P3040.00-K50 is part of the 4P Power Panels series and features a 5.7 inch monochrome LCD display with a resolution of 320 by 240 pixels and 40 membrane keys. It has 10 digital inputs, 8 digital outputs plus 1 dry relay, and operates with a supply voltage of 24 VDC while consuming up to 20 W. The panel is equipped with CAN and RS232 ports supporting maximum baud rates of 500 kbit/s and 115.2 kbit/s, and it provides a front protection rating of IP65.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 4P3040.00-K50 power panel is a compact operator terminal and logic controller manufactured by B&R Automation for the 4P Power Panels series. Within an automated line, it combines visualization, keypad entry, and program execution in one housing, allowing a single device to be mounted in the enclosure door. By interfacing directly with sensors, actuators, and higher-level networks, the panel serves as a local human-machine interface that drives machine sequencing and displays status messages to operators. Its integrated electronics eliminate separate PLC racks and external displays, simplifying wiring in small and medium machinery.
Electrical service is supplied at 24 VDC, and internal conversion limits power draw to a maximum of 20 W, so cabinet heat dissipation remains low. A monochrome LCD with a 5.7 in diagonal presents process graphics at a resolution of 320 × 240 pixels. Forty tactile membrane keys surround the screen, giving direct function selection even when gloves are worn. The aluminum front is sealed to IP65 (front), permitting washdown from cleaning hoses while the rear remains inside the panel. Firmware, recipes, and application code reside in 1.4 MB of FlashPROM, while 700 kB of battery-backed SRAM retains variables during cycles. These hardware resources support deterministic control tasks and simple operator dialogs.
Discrete connectivity is handled by 10 digital inputs for limit switches or proximity sensors and 8 digital outputs plus 1 dry relay output that can energize solenoids or provide potential-free signaling to external contactors. Serial diagnostics or barcode readers attach through an RS232 interface that negotiates up to 115.2 kbit/s. High-speed field communication to distributed I/O nodes is possible over the integrated CAN port, which supports bus traffic up to 500 kbit/s and follows standard 11-bit identifier framing. These channels, combined with the Flash and SRAM resources, allow the panel to manage moderate logic programs while still exchanging real-time data with drives and supervisory SCADA hosts.
Frequently Asked Questions about 4P3040.00-K50:
Q: What is the front protection rating of the 4P3040.00-K50 Power Panel?
A: The 4P3040.00-K50 has a front protection rating of IP65, ensuring resistance to dust and low-pressure water jets.
Q: What type and size of display does the 4P3040.00-K50 use?
A: This model features a monochrome 5.7-inch LCD display with a resolution of 320 x 240 pixels.
Q: How many digital inputs are available on the 4P3040.00-K50?
A: The panel provides 10 digital inputs for interfacing with external devices.
Q: What is the maximum CAN baud rate for the 4P3040.00-K50 Power Panel?
A: The 4P3040.00-K50 supports a CAN port with a maximum baud rate of 500 kbit/s.
Q: How many membrane keys are included on the 4P3040.00-K50?
A: A total of 40 membrane keys are provided for user input on this Power Panel model.
