4D1084.00-090 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 4D1084.00-090 is part of the 4D PanelWare Panels series and features a green LCD display with a resolution of 64 by 240 pixels. It has a character height of 4.0 mm, supports 8 by 40 text format, and uses a CFL miniature fluorescent tube backlight. The panel measures 288 mm wide, 96 mm high, and 35 mm deep, with a current draw of 160 mA at 24 VDC.
Internal Product Review
The 4D1084.00-090 is a B & R Automation PanelWare LCD panel with 64 x 240 pixel resolution and an 8 x 40 character text format. The black-on-white display and CFL backlight provide clear process visibility in control applications. Graphics capability and 160 mA current draw at 24 VDC make the panel an efficient choice for operator interface use.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 4D1084.00-090 is an operator interface panel produced by B&R Automation within the 4D PanelWare Panels series. Intended for installation on machine frames or control cabinets, the module provides an LCD window that presents process values, alarm texts, and prompts while accepting push-button or membrane-key commands from the front of the equipment. By combining display, backlight, and low-voltage power handling in one compact housing, it streamlines human-machine interaction for packaging lines, conveyors, and stand-alone automation cells. This arrangement lets operators review status information and acknowledge process events from one fixed point on the enclosure, which helps reduce the need to open cabinet doors during routine operation.
The visualization hardware is an LCD matrix with 64 x 240 pixels, so bitmapped icons and variable-size fonts render cleanly. For messages, the controller presents up to 8 x 40 characters per screen, which helps keep recipe names and alarm text visible without forced scrolling. Legibility comes from a CFL miniature fluorescent tube backlight and a green foreground with black-on-white display polarity. Glyphs have a 4.0 mm height that stays clear at arm’s length inside a cabinet door. Because graphics capability is built in, simple bar graphs or logo artwork can appear without external cards, and one screen can show short labels, active states, and basic process graphics at the same time.
Electrical consumption is modest; the panel draws 160 mA at 24 VDC, allowing it to share the same low-voltage supply used by sensors and relay coils in many control cabinets. A shallow mounting profile of 35 mm simplifies retrofit into crowded doors, while the faceplate spans 288 mm in width and 96 mm in height to fit common cutouts used in the series. The blue ABS housing resists light oils encountered on production lines, and its sealed bezel helps keep dust away from the viewing area. Because graphics are generated internally, no external driver cards are required, so wiring is limited to the supply leads and the selected fieldbus connection. The low current demand also reduces the load on shared control power circuits and helps the panel fit into compact systems where spare supply capacity is limited.
