0RMSM1135 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 0RMSM1135 is part of the 0RM GateManager Modules series and features an ARM Cortex-A5 processor with a clock frequency of 563 MHz. This module supports Ethernet rates of 10/100 Mbit/s over 100 meters and offers both SMA female and shielded RJ45 connectors. It has a protection rating of IP20 and is housed in aluminum, with dimensions of 107 mm by 32 mm by 97 mm and a weight of 0.5 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 0RMSM1135 is a communications gateway in the 0RM GateManager Modules series from B&R Automation. The module installs beside controllers and sensors to provide routed access for remote maintenance systems and SCADA hosts, replacing on-site visits with secure IP links carried over wired Ethernet or cellular networks. By exposing plant data to higher-level software, it supports condition monitoring and fast parameter updates within industrial automation cells.
A processor clock of 563 MHz drives the onboard logic, so protocol handling, firewall rules, and encryption routines are executed without delaying field traffic. The Ethernet interface supports a rate of 10/100 Mbit/s, which is the maximum throughput available to PLCs connected to the LAN port. Cabling can extend up to 100 m when standard Category 5e media is used, matching the supported reach of the physical layer. Power draw is limited to 3 W, an advantage in cabinets where low heat dissipation is important for temperature-sensitive electronics. An enclosure protection rating of IP20 indicates that the housing blocks solid objects larger than 12.5 mm. The module is intended for operation inside a closed control panel rather than in exposed environments.
An RF front end terminates in an SMA female connector, allowing the installation of antennas tuned to the supported GSM, EDGE, or WCDMA bands for wide-area uplinks. Application code runs on an ARM Cortex-A5 processor, enabling embedded Linux distributions that handle VPN tunneling and remote diagnostics. The aluminum body weighs only 0.5 kg, reducing the load on the DIN rail, while a depth of 97 mm provides clearance when cabinet doors close over dense I/O rows. The module also measures 107 mm in height and 32 mm in width. The uplink side uses a shielded RJ45 jack that complies with the 10BASE-T and 100BASE-TX standards to maintain signal integrity inside electrically noisy drive cabinets.
