0PS102.0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The 0PS102.0 by B & R Automation belongs to the 0PS Power Supplies series and functions as a pressure switch with a changeover contact. It operates within a pressure range of 0.2 to 2 bar, has a max pressure capability of 6 bar, and features Faston terminals for electrical connection. The enclosure is made of brass.
Internal Product Review
The 0PS102.0 is an energy efficient product manufactured according to international standards. It is power supply unit with a service life of about 600,000 hours. The product belongs to the IP20 protection class and requires indoor installation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 0PS102.0 is a power supply unit manufactured by B & R automation for industrial applications. The power supply unit is a single-phase device that maintains an average efficiency percentage of about 88.5 per cent during operation. Customers that purchase this unit can expect a minimum service life of approximately 600,000 hours; however, a typical power loss of 6.8 watts should also be expected. The output noise suppression level of this product belongs to class B according to EN 61000-6-3. The nominal voltage of the unit is between 24 and 28 volts while its output power is measured to be about 50 watts. This product is also designed to provide several protection functions in the servo system, which include short-circuit, overload, and no-load proof protection.
The 0PS102.0 power supply unit can be used in cold areas where ambient temperature does not drop below -10 degrees Celsius, it can also withstand ambient temperature levels as high as 70 degrees Celsius. During storage, the ambient temperature that this power supply unit can withstand is between -25 and about 85 degrees Celsius. There is no fan installed inside this product; it does not produce a high amount of heat and can easily dissipate excess heat through a natural process of convection. The unit can also be easily mounted onto the top-hat rail.
The 0PS102.0 power supply unit features LED power display that is designed to help operators to easily detect any fault in the operation of the power supply unit. The dimension of the product is a 45 millimeter width, 75 millimeters height, and a depth of about 91 millimeters. The total weight of the product is also estimated to be about 0.240 kilograms.
