0GH-PS465 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
49 Seconds
The B & R Automation 0GH-PS465 is part of the 0GH PLC Modules series and provides a nominal input voltage of 24 VDC, with an input voltage range from 18 to 30 VDC. It features a total output power of 60 Watts, with a 24 V output at 50 Watts and a 5 V output at 40 Watts. The module offers IP20 ingress protection, includes an expansion slot, and operates within a temperature range of 0 to 60 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
B & R Automation manufactures the 0GH-PS465, a power supply module in the 0GH PLC Modules series. Designed for control panels, the device converts incoming DC power into stabilized auxiliary rails required by programmable logic controllers and their peripheral modules. By integrating power conditioning into the PLC rack, the part reduces wiring complexity and maintains regulated voltage for CPUs, field I/O, and signaling components used throughout automated machinery. Typical installation points include machine tool cabinets and process skids where compact DC distribution must meet the electrical demands of distributed control hardware.
The input section tolerates a steady supply of 24 VDC, yet the converter stays functional down to 18 VDC and up to 30 VDC, a span that cushions the control system against brownouts or transient overvoltage on the plant bus. Under worst-case demand, the unit draws 3.5 A, a value used when sizing upstream conductors and breakers. Internally, the regulation circuitry is rated for a total output budget of 60.0 W, allowing multiple logic boards to boot simultaneously without undervoltage. An integral expansion slot accepts additional diagnostic hardware, and the ready relay is wired as normally open so downstream interlocks energize only after output levels are within tolerance.
Two fixed rails are available: the 24-volt bus can deliver up to 50.0 W, while a separate 5-volt rail supports logic loads at 40.0 W. Overcurrent conditions are limited by a replaceable fuse rated at 6.3 A slow-blow / 250 V, which opens only after sustained faults and protects both wiring and semiconductor stages. The housing has an IP20 rating, so it is intended for installation inside a closed electrical enclosure with no direct moisture exposure. Continuous operation is specified from 0 °C to 60 °C, and storage is permitted from −25 °C to 70 °C.
Frequently Asked Questions about 0GH-PS465:
Q: What is the total output power capacity of the 0GH-PS465 module?
A: This module supports a total output power of up to 60.0 W for connected devices.
Q: What are the available output power ratings at 24 V and 5 V for the 0GH-PS465?
A: The 0GH-PS465 provides output power of 50.0 W at 24 V and 40.0 W at 5 V.
Q: What input voltage range does the 0GH-PS465 support?
A: The input voltage range for this module is 18 VDC to 30 VDC, with 24 VDC as the nominal value.
Q: What level of ingress protection does the 0GH-PS465 module offer?
A: The ingress protection rating for this model is IP20, which means it is protected against solid objects larger than 12.5 mm but not against water.
Q: What fuse rating does the 0GH-PS465 module require?
A: A 6.3 A slow-blow fuse rated for 250 V is required for the 0GH-PS465, providing overcurrent protection.
