EEA-PAM-511-A-32-EN8 Vickers
Wake Industrial LLC is not an authorized distributor of this product.
The Vickers EEA-PAM-511-A-32-EN8 is a power amplifier from the EEA-PAM Power Amplifiers series. It has a nominal supply voltage of 24 VDC and a command input impedance of 47 kiloohms. The card measures 175.24 mm in height, 40.3 mm in width, and 128.4 mm in depth, and features a DIN 41612 F48 male backplane connector.
Internal Product Review
The EEA-PAM-511-A-32-EN8 from Vickers is a power amplifier equipped with a DIN 41612 F48 backplane connector and operates on a nominal supply voltage of 24 VDC. Its 47 kΩ command input impedance and ±15 V, 50 mA control supply output support stable signal processing. This unit's ramp time of 30 seconds and Eurocard 3U height make it ideal for precise and space-efficient industrial control applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EEA-PAM-511-A-32-EN8 is a plug-in amplifier card from the EEA-PAM Power Amplifiers series manufactured by Vickers. Installed in a valve control rack, the board scales and shapes low-level command signals so proportional or servo valves receive stable drive currents during machine cycles. By occupying a standard 3U Eurocard slot, the module integrates quickly into automation cabinets that rely on modular backplanes for motion and pressure regulation tasks.
The card draws a nominal supply of 24 VDC, and it generates an internal control rail of ±15 V, 50 mA to power on-board electronics and small external sensors. A separate reference channel supplies ±10 V, 5 mA, giving motion controllers a stable set-point source. Incoming command lines encounter a high input impedance of 47 kΩ; this minimizes loading on PLC analog outputs and preserves signal fidelity. A built-in ramp generator extends or shortens acceleration profiles over a maximum of 30 s, preventing hydraulic shock when valve positions shift abruptly. Together, these electrical functions let the amplifier match drive characteristics to process requirements without external conditioning hardware.
Mechanically, the board follows IEC 297 guidelines with a Eurocard height of 3U and measures 128.4 mm deep, 175.24 mm high, and 40.3 mm wide, allowing high-density stacking inside 19-inch sub-racks. Power, feedback, and control lines pass through a backplane connector designated DIN 41612 F48 (Male); field wiring uses the corresponding female mating header on the cabinet harness. M2.5 × 11 pan-head screws secure the module to guide rails so vibration does not loosen circuit contacts. This dimensional uniformity and connector pairing reduce installation time and ensure interchangeability among amplifier cards in multi-axis hydraulic systems.
