106-4203-12E0

Product Description

The 106-4203-12E0 is a part of the DC super mini servo motor design from Sanyo Denki. This product is equipped with a small housing size; however, it still maintains a high torque efficiency. The enclosure of this motor is square, and it is covered in a varnish that provides reliable protection against corrosive liquids. During operation, this industrial motor is able to reach a speed of approximately 3000 revolutions per minute; it is equipped with an encoder with an accuracy level of about 200 pulses per revolution. The high resolution of the integrated encoder helps the motor to maintain a high accuracy while operating at a high speed; it also maintains a relatively low inertial. The housing shaft of the 106-4203-12E0 is made from strong metal; it is a flat shaft that is able to reliably provide efficient transmission of torque from the motor to machine components.

The nominal rated voltage of this product is about 50 volts; it can also be configured to produce a power output as high as 8 kilowatts during operation. There are two major cable requirements for the 106-4203-12E0 motor design: the power cable and the motor feedback cable. These cables are connected to the motor through the connectors integrated at the back of its housing unit. No air blower is integrated into this motor; however, heat is still efficiently handled through a natural convection process.

The 106-4203-12E0 motor is not a waterproof device; however, it can withstand mild water splashes and dust during its operation. During operation, the motor should be installed indoors and in environments with relative humidity less than 95 per cent. The motor is delivered with a <<12 month warranty from Wake Industrial.