Product Description

The Sanyo Denki RS3A05A0AL0 servo drive, part of the R SANMOTION Servo Drives series. It is not recommended to use the built-in brake for regular control since its purpose is to be used to secure the engine. It is possible that the brake might sustain damage otherwise. A potential consequence of this would be damage to the gadget. Maintain a safe distance between the encoder cables of the motor and any static electricity or high voltage.

A potential consequence of this would be damage to the gadget. Servo amplifiers that conform to standard specifications are equipped with a dynamic braking resistor. In the event that the amplifier is not switched on, it is imperative that you refrain from continually rotating the motor from the outside. This is because the dynamic brake resistor will get to a hazardous temperature. Otherwise, there is the possibility of fire or burn. Overvoltage will result in the failure of the amplifier, thus it is imperative that you do not supply voltage to the amplifier that is higher than the specification. In the event that this does not occur, the equipment or the individual may suffer damage.

It is advisable to refrain from turning the power source on and off often. Inner components have the potential to experience early failure if the power source is turned on and off more than thirty times each day, or if it is turned on and off more than five times per hour. Install an external emergency stop circuit that is capable of immediately turning off the power and stopping the device while it is in operation. To ensure that the amplifier is protected in the event of an alert, it is recommended to install an external protective circuit that may switch off the power from the main circuit.