Home Sanyo Denki R SANMOTION Servo Drives RS1L05AC

RS1L05AC

Name: RS1L05AC
Brand: Sanyo Denki
Price: 477 USD
Rating: 4.5 (21 reviews)

Straightforward Pricing: No Rush Fees, No Credit Card Fees

Call for Availability

The RS1L05AC servo drive features a rated power supply of 0.2 kVA, a torque range of 0.1 to 0.8 Nm. with speeds up to 7000 min-1, and CAN open communication with selectable bit rates up to 1Mbps. Part of the R SANMOTION Servo Drives series by Sanyo Denki, it supports an amplifier power supply range of AC100V to 115V.

Preparing your secure checkout page...

Description
Specs
FAQ

Product Description

The RS1L05AC is a servo amplifier built by Sanyo Denki to provide reliable motion control for several motor designs. The amplifier represents an advancement over conventional SANMOTION R amplifier designs; it has a size that is up to 15 per cent smaller due to its minimized power circuit. The amplifier also saves up to 19 per cent of energy by adopting a new generation Intelligent Power Module (IPM). The amplifier is characterized by a significantly increased response time; compared to the earlier design, the positioning time of this amplifier is about 50 per cent less. When operated with the appropriate motor design, the model produces a significantly reduced vibration noise. There is a 5-digit LED display integrated into the front panel of this product; this display plays an important role in helping operators monitor the current operation status of the amplifier.

The RS1L05AC servo amplifier is an easily configurable product; it has a PC interface for communicating with a PC through which parameter setting and monitoring can be performed by operators. Other connection interfaces on this drive include the electromagnetic connector, general input/output connector, motor power connector, encoder connector and a PLC safety unit connector. The amplifier features a built-in regenerative resistor; however, an external resistor might be required when the capacity of the internal connector is unable to support the amplifier due to the high frequency of use.

The RS1L05AC servo amplifier is built to meet the IP20 protection category; it requires installation inside a control cabinet before its operation. This amplifier features several built-in protective functions, including over current, current detection error, speed feedback error, excessive position, position command error, and Built-in memory error. The speed control range of the product is 1:5000 while its frequency character is about 800 hertz.

RS1L05AC Technical Specifications

Amplifier Mass (Single-axis):	0.9 kg
Standard Encoder:	Battery-backup absolute (PA035C)
Max Nodes Per Segment:	1-127
Motor Operating Temperature:	0 to 40°C
Output Port Max Current:	50mA (DC24V)
Rated Power:	0.2 kVA
Torque Range:	0.1-0.8 Nm
Max Speed:	7000 min-1
Warranty:	12 months
Amplifier Mass (Multi-axis):	0.48 kg
Amplifier Model (Single-axis):	RS1E01A□
Amplifier Model (Multi-axis):	RR1E01AAB
Amplifier Operating Temperature:	0 to 55°C
Amplifier Power Supply:	AC 100-115V ±10/-15% 50/60Hz ±3Hz
Brake Mass:	0.27 kg
CANopen Bit Rate:	125kbps, 250kbps, 500kbps, 800kbps, 1Mbps
Fieldbus:	CANopen

Frequently Asked Questions about RS1L05AC

Q: What control operations does the RS1L05AC servo amplifier provide?

A: The RS1L05AC allows operators to switch between control modes for torque, position, or velocity.

Q: What type of connection terminal is equipped with the RS1L05AC?

A: The RS1L05AC features DC reactor connection terminal. This terminal helps to suppress its power supply harmonics.

Q: What type of display unit is integrated into the RS1L05AC?

A: The RS1L05AC features a five digit display unit and a built-in operator for parameter setting, monitoring, and alarm tracing.

Q: Is the RS1L05AC configurable?

A: Yes. It is possible to configure the RS1L05AC using a Setup software designated for the drive. The software allows operators to designate parameters related to position, velocity and torque control.

Q: Does the RS1L05AC require an external regenerative resistor?

A: The use of an additional regenerative resistor is only necessary when the built-in resistance capability is not sufficient for the application it is required for.

Internal Product Review

‘‘The RS1L05AC is a reliable servo drive that is characterized by a smaller response time and a high operation efficiency. This driver has several built-in protection features including overcurrent, overload, and amplifier overheating protection. It also features a reliable built-in dynamic brake circuit. ’’