RS1L03AE0

Product Description

RS1L03AE0 is a Sanmotion R series servo amplifier from Sanyo Denki. It is designed for single-axis control applications. Input voltage rating for the amplifier is 200 Volts AC (three-phase) and the control power rating is 200 Volts AC (single-phase). Current input rating for the amplifier is 5.2 Amps. The control circuits draw 0.2 Amps current. The output voltage of the RS1L03AE0 amplifier can range from 0 to 326 Volts (three-phase) and the output current is 5.2 Amps. If required, a noise filter can be used to prevent electromagnetic interference in the power line from affective the amplifier. A circuit breaker can also be used to protect the device from overloads. A computer connected to the amplifier via a serial link can be used for its configuration. Sanyo setup software must be installed on the computer.

Operators can use the setup software to configure parameters and view rich graphical views of motor speed, position and torque. Operators can configure parameters to allow the amplifier to switch between control modes for speed, position or torque. A built-in LED display provides information for monitoring and control of the amplifier. The amplifier is equipped with a heat sink and cooling fan for heat dissipation. Maintenance of ambient temperature within prescribed limits is necessary for rated output and for equipment safety. Use of the amplifier outside prescribed temperature limits can lead to output derating and can also lead to component malfunction. The RS1L03AE0 amplifier is designed for mounting vertically. The communication interfaces are located on the front of the unit. The wiring terminals are also located at the front of the amplifier. Only experienced professionals should be tasked with amplifier operation.