Product Description

RS1A03AAWFF is a Sanyo Denki Sanmotion R series servo amplifier. A type plate is attached to the device. The serial number and specifications on this type plate should be checked to ensure that the correct item has been delivered. There is a 5-digit 7-segment LED display on the front of the unit. This display provides status and diagnostic information for operations. Four keys to operate the digital operator are located below the display. The front panel also features a connector for connecting to the PC with setup software, a connector for device I/O signals, encoder signal connector, motor power connectors, ground terminal, connection points for the regenerative resistors and the main power supply connector. The RS1A03AAWFF amplifier is designed for 200 Volts AC input. Its current rating is 30 Amps.

It supports connection to a wire-saving incremental encoder. Operators can use the device for speed, position, and torque control. Control system available on the RS1A03AAWFF is IGBT PWM control. Control circuit on the device accepts single-phase AC input at 100/200 Volts. The specified ambient temperature for amplifier operation is 0 to 55 degrees Celsius and the storage temperature is from -20 to 65 degrees Celsius. The specified relative humidity for amplifier operation and storage and up to 90%. Sites used for operating the amplifier should have elevations up to 100 0meters. The amplifier has a tray type power supply. Its weight is approximately 1 kilogram. Built-in regeneration process and dynamic brake are available. Protection functions supported by the amplifier include excessive position error, main circuit open phase, overheating, over voltage, low voltage and memory error. The amplifier and associated equipment should be operated by qualified personnel.