PV2A015SM61PA1 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki PV2A015SM61PA1 belongs to the PV Super Servo Amplifiers series and has an amplifier capacity of 15 Amps with position control mode. It uses a 32-bit RISC plus DSP CPU and features a wiring-saving incremental feedback type with a resolution of 2,000 pulses per revolution. The amplifier operates on a single-phase 200 VAC input and is equipped with a DeviceNet network interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PV2A015SM61PA1 is a servo amplifier manufactured by Sanyo Denki for the PV Super Servo Amplifiers series. In an automation cell, this drive regulates current and position for a matched AC servo motor, converting control signals into precise phase currents so actuators follow programmed motion profiles. By combining processing, feedback, and power stages in one compact unit, the amplifier links motion controllers with machine tools, pick-and-place axes, and other positioning systems that demand repeatable accuracy.
The power stage can deliver a continuous output of 15 A, providing sufficient current for compatible small- to medium-frame servo motors. That current is drawn from a single-phase 200 VAC mains input, allowing installation in facilities that do not provide three-phase service. A dual-core control section with a 32-bit RISC processor and DSP executes the position loop, while a velocity-loop bandwidth of 400 Hz lets the drive track rapid speed commands with minimal lag. Rotor position information is sampled at a resolution of 2,000 pulses per revolution through a wiring-saving incremental encoder, and the amplifier operates exclusively in position mode for straightforward axis setup. The DeviceNet port supports network communication with compatible control equipment. Leakage current is limited to 1 mA, and the wiring-saving feedback connection reduces the number of conductors required for panel integration.
Program storage for up to 255 block command points allows standalone sequencing when the host PLC is offline. To dissipate excess kinetic energy, the internal dynamic circuit connects to a 100 Ω regenerative resistor rated for 5 W, helping prevent overvoltage during deceleration. The amplifier is sized for machines that pair it with a 200 W motor. Its housing is only 50 mm wide, 172 mm high, and 130 mm deep, so multiple axes can be mounted in a narrow cabinet channel without obstructing airflow. This compact form also reduces the lateral panel space needed for multi-axis arrangements while preserving access to the amplifier connections.
Frequently Asked Questions about PV2A015SM61PA1:
Q: What is the amplifier capacity of the PV2A015SM61PA1 from Sanyo Denki?
A: This amplifier is rated for a capacity of 15 A, enabling it to drive compatible servo motors efficiently.
Q: What type of CPU is incorporated in the PV2A015SM61PA1 amplifier?
A: The PV2A015SM61PA1 uses a 32-bit RISC + DSP CPU, providing fast and precise servo control.
Q: Which network interface is available on the PV2A015SM61PA1 amplifier?
A: DeviceNet is the network interface, offering straightforward integration into industrial device networks.
Q: What is the matched motor output for the PV2A015SM61PA1?
A: The matched motor output for this model is 200 W, ensuring compatibility with motors in the same power range.
Q: What control mode does the PV2A015SM61PA1 amplifier support?
A: Position control is the designated control mode for the PV2A015SM61PA1, making it suitable for applications requiring accurate positioning.
