P60B13150HXS0JE

Product Description

The P60B13150HXS0JE is an industrial motor design that has a characteristic small size, which is perfect for applications that require high motor precision by having little spacing for the installation of the motor. This motor design is from Sanyo Denki; it is classified as a medium inertial product that belongs to the IP67 product design and can easily withstand dust and even temporary water inertial. The measured flange square size of this motor is about 130 millimeters; despite its strong housing unit, it is expected to be used indoors and protected from extreme vibration conditions. The input current supply required by this motor series is about 9.4 amperes; it can also produce a power output of 1.5 kilowatts. To protect the housing of this motor design from the corrosive liquids it might come in contact with, it is covered in a prime black coat, which is resistant to dilute acids, mineral oils, and dilute alkalis.

The P60B13150HXS0JE motor operates at a speed of approximately 2000 revolutions per minute, its input voltage requirement is about 200 volts while its total weight is determined to be about 8 kilograms. No holding brake is installed into the motor; its integrated encoder is an incremental encoder design that does not require wiring. Compatible controllers from Sanyo Denki should also be used for the control of the motor.

The P60B13150HXS0JE industrial motor is able to withstand environmental temperatures as low as 0 degrees Celsius and as high as 40 degrees, also humidity levels around the motor can be as high as 90 per cent without any problem. For customers that desire to operate this motor without derating, its installation height should be maintained below 1000 meters above sea level.