P10B10075HXS22 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P10B10075HXS22 is a brushless servo motor with a 100 mm flange size and a rated output of 750 Watts. Part of the P1 Super BL Servo Motors series, it features an IP67 rating with fully closed, self-cooling protection and reaches a maximum speed of 3000 min-1. This motor is equipped with a wiring-saved incremental encoder at a resolution of 6,000 pulses per revolution and is intended for continuous duty.
Internal Product Review
The P10B10075HXS22 is a Sanyo Denki P1 Super BL servo motor with 750 W rated output and brushless motor technology. The wiring-saved incremental encoder with 6,000 P/R supports clean feedback integration and precise motion control. IP67 protection and a fully closed, self-cooling design make this motor a strong choice for demanding service conditions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P10B10075HXS22 is a brushless AC servo motor manufactured by Sanyo Denki within the P1 Super BL Servo Motors series. Designed for continuous-duty positioning tasks, the unit converts drive current into precise rotary motion for robots, pick-and-place actuators, and conveyor indexing stations. Its permanent-magnet excitation system supports stable torque production without the mechanical switching components used in brushed motors. Position and speed data allow the connected drive to correct motion as operating loads change. The motor’s compact form also makes it suitable for automated equipment where available mounting space is limited.
The motor provides a rated mechanical output of 750 W, making it suitable for axes that remain energized throughout a production shift. Speed feedback is generated by a wiring-saving incremental encoder with a resolution of 6,000 pulses per revolution, giving the drive fine control during small positioning movements. The housing has an ingress protection rating of IP67, protecting the internal windings and bearings from dust and temporary immersion in water. Peak rotor speed reaches 3,000 rpm, providing the velocity needed for rapid indexing and material-handling cycles. A square face measuring 100 mm uses a flange mounting pattern that simplifies alignment with compatible machine frames. The flange connection also provides a rigid interface for maintaining shaft alignment under changing radial loads.
The motor withstands 1,500 VAC for one minute between the windings and frame, providing electrical isolation during operation. Its insulation resistance is at least 10 MΩ when measured at 500 VDC, helping restrict leakage current through the insulation system. The stator and terminal box are fully enclosed, while the self-cooling housing transfers heat through its ribbed outer shell without requiring a separate fan. A perimeter seal prevents coolant splashes from reaching the laminations and other internal components. The motor does not include a holding brake, so an external mechanism must secure vertical loads when power is removed. The assembly conforms to vibration grade V10, limiting vibration transmitted to optical devices or precision tooling connected to the shaft. Its brushless design eliminates commutator wear and reduces the need for maintenance associated with brushes and mechanical contacts.
